Admin
مدير المنتدى
عدد المساهمات : 18726
التقييم : 34712
تاريخ التسجيل : 01/07/2009
الدولة : مصر
العمل : مدير منتدى هندسة الإنتاج والتصميم الميكانيكى
 |  موضوع: كتاب Emerging Technologies in Non-Destructive Testing السبت 13 يونيو 2020, 2:34 am | |
| 
أخوانى فى الله
أحضرت لكم كتاب
Emerging Technologies in Non-Destructive Testing
Editors
Gerhard Busse
University of Stuttgart, Germany
Danny Van Hemelrijck
Vrije Universiteit Brussel, Belgium
Igor Solodov
University of Stuttgart, Germany
Athanasios Anastasopoulos
Envirocoustics, Athens, Greece
و المحتوى كما يلي :
Table of Contents
Preface IX
Organisation XI
Keynote lectures
Damage characterization and real-time health monitoring of aerospace
structures based on ultrasonic microscopy and nonlinear acoustics 3
T.E. Matikas
NDE of micro structured materials by X-ray diffraction and refraction topography 15
M.P. Hentschel, K.-W. Harbich, B.R. Müller, A. Lange, J. Schors & O. Wald
Use of state of the art parametric arrays for low frequency measurements in sound
absorbing porous materials 23
B. Castagnede, A. Moussatov, D. Lafarge, V. Tournat & V. Gusev
Optical techniques
Crack sizing using laser vibrometer measurements of Surface Acoustic Waves 33
R. Longo, S. Vanlanduit & P. Guillaume
Non-destructive evaluation of composite structures using an innovative Bragg sensor 39
G. Luyckx, J. Degrieck, W. De Waele, W. Van Paepegem, J. Vlekken & T. Verbeke
New possibilities and applications of Lockin-Speckle-Interferometry for non-destructive
testing of polymers 45
P. Menner, H. Gerhard & G. Busse
Investigation of fatigue cracks using digital image correlation 53
S. Vanlanduit, J. Vanherzeele, R. Longo & P. Guillaume
Monitoring of a curved beam test structure using Bragg sensors 59
G. Luyckx, J. Degrieck, I. De Baere, W. De Waele, W. Van Paepegem & T. Verbeke
The use of optical fibers for fatigue testing of fiber-reinforced thermoplastics 65
I. De Baere, G. Luyckx, W. Van Paepegem, J. Degrieck, E. Voet & J. Vlekken
Illumination direction factor in quantitative shearography NDT analysis 71
W.S. Wan Abdullah
Ultrasound
Advanced transducer development for long range ultrasonic inspection systems 79
A.G. Haig, P.J. Mudge, T-H. Gan & W. Balachandran
Damage assessment of composites after fatigue by means of acoustic methods 83
T.T. Assimakopoulou & T.P. Philippidis
New opportunities in acoustic NDT using frequency conversion by nonlinear defects 89
K. Pfleiderer, I. Solodov & G. Busse
VMonitoring of damage accumulation in cyclic loaded c/c woven composites using the
acousto-ultrasonics approach 95
T.H. Loutas & V. Kostopoulos
Non-destructive testing of fuel tanks using long-range ultrasonics 99
L. Ma?eika, R. Ka?ys, R. Rai?utis, A. Dem?cenko, R. ?literis & C. Cantore
Guided acoustic modes for testing surface layers of unconsolidated granular media 105
X. Jacob, V. Aleshin, V. Tournat, O. Dazel, J.-F. Allard, V. Gusev, P. Leclaire & W. Lauriks
Thin layers characterization by low frequency ultrasonic transmission 113
R. Mittal & G. Rus
Laser ultrasonics for non-contact materials characterization of fiber reinforced materials 121
P. Burgholzer, C. Hofer, B. Reitinger, H.P. Degischer, D. Loidl, P. Schulz, R. Nuster & G. Paltauf
Investigation of mode conversion in ultrasonic air-coupled non-destructive testing 129
R. Ka?ys, A. Dem?cenko, L. Ma?eika, R. ?literis & E. ?ukauskas
Air-coupled ultrasonic pitch-catch method for material inspection 137
E. Blomme, D. Bulcaen, F. Declercq, J. Deveugele & P. Lust
Improvement of performance of scanning acoustic microscope for on-line inspection
of electronic components 145
L. Ma?eika, R. Ka?ys, O. Tum?ys & C. Gartside
Acoustic emission
Damage discrimination of composites based on wavelet decomposed acoustic emission signals 153
G. Kalogiannakis & D. Van Hemelrijck
Risk assessment of tunnels by Quantitative Acoustic Emission Non-Destructive method 161
G. Muravin, L. Lezvinsky & B. Muravin
Quantitative Acoustic Emission Non Destructive Inspection method and its application
to risk assessment high energy piping, fossil nuclear and chemical plants 167
B. Muravin, G. Muravin & L. Lezvinsky
The application of cepstrum and kurtosis analysis as predictive maintenance tools
in vibration and acoustic emission signals obtained from reciprocating machinery 171
S.C. Kerkyras
Thermal methods
A fast and robust method for determining thermal diffusivity images in complex geometries 179
G. Mayr, G. Hendorfer, G. Zauner & F. Puchberger
Deep Level Photo-Thermal Spectroscopy 187
J. Xia & A. Mandelis
Thermal characterization of composite materials by grating IR thermography 193
G. Kalogiannakis, H. Zhang, C. Glorieux, J. Ravi, S. Longuemart & D. Van Hemelrijck
Ultrasound Sweep Thermography (UST) as a new method of non-destructive testing 199
C. Spiessberger, A. Gleiter & G. Busse
Non-contact case depth monitoring of industrial hardened parts using laser
infrared photothermal radiometry 205
A. Mandelis, J.A. Garcia & C.-H. Wang
Portable computed tomographic system for in-situ inspection of industrial pipelines 211
J. Abdullah, G.H.P. Mohamad, M.A. Hamzah, M.S.M. Yusof, M.F.A. Rahman & F. Ismail
VIRadiography and tomographic methods
Synchrotron-Refraction-Computed-Tomography for NDT and characterisation of
lightweight composite materials 217
B.R. Müller, A. Lange, M. Harwardt, M.P. Hentschel, B. Illerhaus, J. Goebbels
J. Bamberg & F. Heutling
Non-destructive testing with terahertz radiation: Applications in the field
of polymer fabrication and food production 223
C. J?rdens, F. Rutz, S. Wietzke & M. Koch
Direct iterative reconstruction of computer tomography trajectories (DIRECTT) 229
A. Lange, M.P. Hentschel & J. Schors
Characterization of automotive parts by a novel multi-scan tomography system 237
M. Simon, I. Tiseanu, C. Sauerwein, M. Sindel, R. Kauermann & J. Schmidt
NDT with Optical Coherence Tomography: A novel tool for material characterization 243
D. Stifter, E.I. Breuer, M. Wurm, K. Wiesauer, M. Pircher, E. G?tzinger,
C.K. Hitzenberger, R. Engelke, G. Ahrens & G. Grützner
Electro-magnetic techniques
Defect detection using a non-contact electric potential drop method for multilayer
carbon composite materials 251
P. Stiffell, R.J. Prance, W. Gebrial, C.J. Harland & H. Prance
Lift-off and edge effects in micro-magnetic testing of heat-treated steel C45 257
J. Grum & P. ?erovnik
An electromagnetic non-invasive examination technique of Bj?rk-Shiley Convexo-Concave
prosthetic heart valve: Degradation modeling and periodic clinical controls optimization
using Markov model 263
R. Grimberg, A. Savin, R. Steigmann, S.C. Chan, L. Udpa, S.S. Udpa & F. Pinte
Electrical resistance measurement on carbon fiber reinforced thermoplastics with rivets as electrodes 269
I. De Baere, W. Van Paepegem & J. Degrieck
Subsurface imaging using moving electromagnetic fields and surface acoustic waves 275
G. Mook, F. Michel, J. Simonin, M. Krüger & M. Luther
Inverse problem for the EC transducer with rotating magnetic field; application to pressure tubes
inspection for PHWR nuclear power plant 281
R. Grimberg, A. Savin, R. Steigmann, L. Udpa, S.S. Udpa & A. Bruma
EddyCation—the all-digital eddy current tool for education and innovation 289
G. Mook & J. Simonin
NDT of civil engineering structures
Damage characterization of deteriorated concrete structures by stress wave methods 297
D.G. Aggelis & T. Shiotani
Improving results of thermographic inspections of electrical transmission and distribution lines 303
J. Snell & J. Renowden
Structural health monitoring in civil engineering—applications using wireless sensor networks 313
C.U. Grosse & M. Krüger
Ultrasonic nondestructive through transmission testing of concrete 319
A.A. Shah & Y. Ribakov
VIISpecial techniques and applications
The effect of defects on the strength of adhesively-bonded joints and its significance for NDT 327
R.D. Adams & E.F. Karachalios
Comparison of different X-ray computed tomography techniques for the quantitative
characterization of the 3D microstructure of pear fruit tissue 331
P. Verboven, H. Mebatsion, F. Mendoza, K. Temst, M. Wevers, B. Nicolaï & P. Cloetens
Identification of the mechanical material parameters through inverse modelling 337
S. Cooreman, D. Debruyne, S. Coppieters, D. Lecompte & H. Sol
Fused sensor scanning system for non-destructive testing of metal matrix composites 343
V. Shinde, T. Valatka, J. Donahue, D. Ozevin, V.F. God?nez-Azcuaga, R. Finlayson,
B.B. Raju & A. Anastasopoulos
Ultrasound and eddy current data fusion for evaluation of carbon-epoxy composites delaminations 349
R. Grimberg, R. Steigmann, S. Leitoiu, A. Andreescu & A. Savin
Constitutive models for solids containing rough cracks: From micro to macro 357
V. Aleshin & K. Van Den Abeele
Author index
كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net
أتمنى أن تستفيدوا من محتوى الموضوع وأن ينال إعجابكم
رابط من موقع عالم الكتب لتنزيل كتاب Emerging Technologies in Non-Destructive Testing
رابط مباشر لتنزيل كتاب Emerging Technologies in Non-Destructive Testing 
|
|
