Admin
مدير المنتدى
عدد المساهمات : 18938
التقييم : 35320
تاريخ التسجيل : 01/07/2009
الدولة : مصر
العمل : مدير منتدى هندسة الإنتاج والتصميم الميكانيكى
 |  موضوع: كتاب Advances in Machining & Manufacturing Technology IX الأربعاء 07 أبريل 2021, 3:57 pm | |
| 
أخوانى فى الله
أحضرت لكم كتاب
Advances in Machining & Manufacturing Technology IX
Selected Papers from the 9th Conference on
Machining & Advanced Manufacturing Technology in China
August 16– 19, 2007, Harbin, China
Edited by
Yingxue Yao, Xipeng Xu and Dunwen Zuo
Table of Contents
و المحتوى كما يلي :
Sponsors
Preface
Progress of Research in Slicing Technology of Large-Scale Silicon Wafers
L.G. Zhao, D.W. Zuo and Y.L. Sun 1
The Analysis on Movement of the Charged Particles in a Magnetic-Electrochemical
Compound Polishing
L.M. Shi, Y.Q. Chen and E.L. Liu 6
Study on Brittle-Ductile Transition Mechanism of Ultra-Precision Turning of Single Crystal
Silicon
M.H. Wang and Z.S. Lu 11
Initiation and Propagation Laws of Glass Cracks in Specimens under the Action of
Cylindric Indenter Subjected to Normal Load
Z.P. Wan, W.J. Deng and Y. Tang 17
Large Plastic Deformation and Ultra-Fine Grained Structures Generated by Machining
W.J. Deng, W. Xia, Y. Li, Z.P. Wan and Y. Tang 21
Mechanism of Chip Deformation in Orthogonal Cutting the Wheel Steel
K. Xue, X.M. Xu, G. Liu and M. Chen 26
The Influence of Tool Edge Radius on Size Effect in Orthogonal Micro-Cutting Process of
7050-T7451 Aluminum Alloy
J. Zhou, J.F. Li, J. Sun and Z.P. Xu 31
Behaviors of Suspended Powder in Powder Mixed EDM
Y.G. Wang, F.L. Zhao and Y. Liu 36
Study on Mechanism of Vibration Cutting
F.Q. Tong, Y. Zhang, F.H. Zhang, J.Y. Lu, L.Z. Gu and Y.C. Chen 42
Study on the Polishing Mechanism of Low Temperature Co-Fired Ceramic for Microsystem
Application
J.J. Zhu, J.L. Yuan and S.S. Ang 47
Mechanism of Brittle-Ductile Transition of Single Silicon Wafer Using Nanoindentation
Techniques
Y.L. Sun, D.W. Zuo, D.S. Li, R.F. Chen and M. Wang 52
Theoretical Study on the Bending Deformation of Metal Plate Induced by Repetitive Laser
Shot Peening
J.Z. Zhou, S. Huang, X. Ji, J.J. Du, C.J. Yang and Y.K. Zhang 57
Experiment Study on Abrasive Waterjet Machining Mechanisms of Brittle Materials
H.T. Zhu, C.Z. Huang, J. Wang, Q.L. Li and C.L. Che 62
Forming and Control of Feed-Direction Burr in Drilling
G.C. Wang, S.T. Fan, Y.M. Zhu, H.J. Pei, H.J. Qu and Q.F. Li 67
Study on the Shaping Law of Precision Numerical Controlled Electrochemical Contour
Evolution Machining
M. Kang and J.W. Xu 72
The Key Techniques of Novel Miniaturized Ultrasonic Motor and its Application in MicroEDM
Y.J. Tang, Z.L. Wang, Z.N. Guo and Y.J. Zhang 77
A FEM and Experiment Study on High Speed Machining of Nickel-Based Superalloy
GH4169
D.J. Zhang, C. Wang, G. Liu and M. Chen 82
Mechano-Chemical Modification of Nanodiamond with GW
Y.W. Zhu, X.Y. Xu, B.C. Wang and J.L. Shen 87
Analysis of Interlayer between WC–Co and CVD Diamond Film
W.Z. Lu, D.W. Zuo, M. Wang and F. Xu 92
Effect of Fabrication Parameters on Mechanical Properties of Al2O3 Ceramic Tool
Materials
B. Fang, C.Z. Huang, H.L. Liu and C.H. Xu 97b Advances in Machining & Manufacturing Technology IX
Cutting Performances, Mechanical Property and Microstructure of Ultra-Fine Grade Ti
(C,N)-Based Cermets
H.D. Yang, X.Q. Xia, W.L. Chen, N. Liu and C.G. Zhang 102
Analysis of the Axial Tensile Properties of Multidirectional Filament Wound Tubes
X. Xie, Y.M. Jiang, G.X. Qiu, P. Wang and A.F. Xu 107
Dispersive Characteristics of Multi-Phase and Multi-Scale Nanocomposite Ceramic
Powders
H. Wang, C.Z. Huang, H.L. Liu, J.W. Yu and S.R. Xiao 113
Research on the Stress Intensity Factor of the Crack Parallel to and Lying on the Interface
of Cermet Cladding Parts
J.R. Yang, Z.Q. Li, C.Z. Huang, Y.K. Zhang and K.K. Qian 118
Study of the Thermal and Intrinsic Stress of Large Area Diamond Film Prepared by
HFCVD
F. Xu, D.W. Zuo, W.Z. Lu, M. Wang and H.Y. Zhang 123
Development of Self-Toughening Silicon Nitride Matrix Nanocomposite Ceramic Tools and
Cutting Performance
C.Z. Huang, B. Zou and H.L. Liu 128
Research on the Advanced Ceramic Die Materials and Their Properties
C.H. Xu, G.C. Xiao, R.B. Zhang and Y.M. Feng 133
Effect of Boron Concentration on Adhesion and Cutting Performance of Diamond-Coated
Cemented Carbide Tools
C.Z. Yao, F.H. Sun, Z.M. Zhang and M. Chen 138
Surface Properties of 3000°C High Melting Point Material by Powder Mixed EDM
F.Q. Hu, H. Zhang, W.S. Zhao, Z.L. Wang, D. Hu and Y. Yu 143
Experimental Study of Mechanical Properties of Electroformed Nanocrystalline Ni-Mn
Alloys
J.M. Yang and D. Zhu 148
Micro-Forming Process and Microstructure of Deposit by Using Micro EDM Deposition in
Air
Z.L. Peng, Z.L. Wang and B.D. Jin 153
Study on the Cutting Technology Based on Green Manufacturing
Z.G. Jiang, H. Zhang and X. Luo 158
Development and Application of Cermet Cutting Tools Material
T. Fu, Q.X. Yu, B. Liu and Y.G. Wu 163
Development & Application of Polycrystal Cubic Boron Nitride Cutting Tool Material
J.Y. Zhang, Q.X. Yu, S.Q. Pang, S.S. Meng, T.S. Wang and J.T. Hu 168
The Effect of Superheated Water Vapor as Coolant and Lubricant on Chip Formation of
Difficult-to-Cut Materials in Green Cutting
R.D. Han, Y. Zhang, Y. Wang, G.F. Cao and J. Liu 172
Study of Experiments on Cutting Difficult-to-Machine Materials with Ultrafine-Grained
Waved-Edge Milling Insert
Z.G. Wang, Z.J. Li, D.H. Zhu, R.M. Zhu and Y.N. Li 177
The Influence of Material Constitutive Constants on Numerical Simulation of Orthogonal
Cutting of Titanium Alloy Ti6Al4V
J.L. Chen, J.F. Li, J. Sun, Z.Q. Wang and Z.P. Xu 182
Effect of Chamfered PCBN Tool Edge Geometries on Hard Turning Process
T. Chen, F.G. Yan, C.Y. Wu, H.M. Pen and X.L. Liu 187
Experimental Research on Orthogonal Cutting and Oblique Cutting of Hardened Steel
GCr15
Y. Wang, P. Wang, H.M. Pen, Y.F. Li and X.L. Liu 192
Experimental Investigation on Air Cooling of GCr15
J.S. Hu, D.X. Liu, Y.Z. Liu, C.X. Yue and X.L. Liu 197
Research of Grinding Revolving Curved Surface with Arc Envelope Grinding Method
L.Y. Kong, Q.S. Yan, X.G. Zhou and J. Dai 201
Study on Chip Breaking Behavior of 3-D Complex Groove Insert in Machining Carbon
Constructional Steel at High Cutting Speeds
H.P. Zhang, Z.J. Li, E.L. Liu and G.L. Wei 206
An Experimental Study on Diamond Cutting of Optical Glass
H. Zhao and M. Zhou 211Key Engineering Materials Vols. 375-376 c
Characterization of Diamond Spherical Shell Thick Film by DC Plasma CVD
D.S. Li, D.W. Zuo, Y.L. Sun, R.F. Chen, W.Z. Lu, B.K. Xiang and M. Wang 216
Theoretical and Experimental Research on Tapping of GH4169 and TC4 with ModifiedTooth Taps
Y.L. Tang, R.D. Han and J.B. Ju 221
Theoretical Research on Tooth Profile Modification with Electroplated CBN Hard Honing
Wheels
M.D. Zhang, M. Lv and S.Q. Yang 226
Experimental Investigation on Cutting Force and Tool Wear of Carbide Tools in Ti6Al4V
Turning
X.Q. Wang, X. Ai, J. Zhao and T.T. Li 231
Influence of Drill Geometry in Drilling Carbon Fiber Reinforced Plastics
C.C. Tsao 236
Research on Heating Density Function of Milling Insert with 3D Complex Groove
M.Y. Wu, Q.X. Meng, G.Y. Tan and Q. Liu 241
Experiment Study of Combining Micro EDM with USM
B.X. Jia, D.S. Wang, Z.L. Wang and W.S. Zhao 248
Experimental Research on Microelectroforming with Ultrasonic Agitation
P.M. Ming, D. Zhu, Y.Y. Hu and Y.B. Zeng 253
Research on the Force Characteristics in Ultrasonic Grinding Nano-Zirconia Ceramics
G.F. Gao, B. Zhao, D.H. Xiang and Q.H. Kong 258
Material Removal Rate Characteristics in Ultrasonic Aided Lapping of Engineering
Ceramics Based on Single-Point Scratch
F. Jiao, B. Zhao, C.S. Liu and X.S. Zhu 263
Experimental Investigation on Ultrasonic Face Machining of Glass with Free Abrasives
S.Y. Zheng and X.P. Xu 268
Optics Manufacturing Using Magnetorheological Finishing
G.W. Kang and F.H. Zhang 274
Chemical Mechanical Polishing of Transparent Nd:YAG Ceramics
J. Li, Y. Zhu and C.T. Chen 278
Research on Chemical Mechanical Polishing for Silicon Nitride Ceramics
C.R. Zhu, J.L. Yuan, Q. Xu and B.H. Lv 283
The Molding Study of Polyimide Polishing Film
X.C. Xu and Z.J. Yuan 288
Effects of Conditioning Parameters on Pad Performances
X. Wei, H. Yuan, W. Xiong and X.Z. Xie 293
Fabrication of Cylindrical Tungsten Microelectrode by Electrical Machining
B.G. Zhu, Z.L. Wang and B.X. Jia 298
Study on Technology of Block Electro-Discharge Grinding with Lower Working Voltage for
Fabricating Micro Electrode
Z.L. Wang, W.L. Zeng and Q. Gao 303
Design of Freeform Surface Finish Using Synchronous Processes of Electrochemical
Finishing and Burnishing
P.S. Pa 308
Electrical Discharge Machining (EDM) Phenomena of Insulating ZrO2 Ceramics with
Assisting Electrode
Y.F. Guo, G.Q. Deng, J.C. Bai and Z.S. Lu 313
Research on Micro Electrochemical Milling
X.H. Li, Z.L. Wang, J.F. Wang and X.R. Wang 318
Preparation and Performance of Ceramic Coatings Formed by Micro Arc Oxidation on
Titanium Alloy
Y.X. Yao, L.Q. Li and J.J. Xi 323
The Effects of Laser Texturing Parameters on Wear Properties of Rollers with Fractal
Geometry
H.B. Liu, D.P. Wan and D.J. Hu 328
Affected Characteristics Analysis of the Pulsed Laser Forming of Metal Sheet
L.J. Yang and Y. Wang 333d Advances in Machining & Manufacturing Technology IX
Experimental Investigation on the Nickel-Based Metal Components Fabricated by Laser
Cladding
X. Ji, J.Z. Zhou, H.F. Guo and D.P. Xu 338
Theoretical and Experimental Study on Laser Compound Forming of Plate
S. Huang, J.Z. Zhou, Y.B. Chen, Y.Q. Sun and J.J. Du 343
Nano-SiC Modified Plasma Sprayed Ceramic Coatings Prepared by Laser Sintering
Z.J. Tian, L.D. Shen, Y.H. Huang and G.R. Hua 348
Study on Integrated Method of Medical Implant Manufacture Based on Rapid Prototyping
Technology
W.P. Wang, S. Sekou, Y.X. Liu, D.C. Li, B.H. Lu and J. Wang 353
Study on Inner Micro-Grooves of Heat Pipe Spinning Process and Multi-Tooth Mandrel
Y. Li, Y. Tang, X.B. Li, W.J. Deng and Z.X. Zeng 358
Laser Surface Coating-Texturing of Cold Roll with Hard Dimples
D.P. Wan, H.B. Liu, D.J. Hu and H.F. Wang 364
Dynamic Characteristics Analysis of Diamond Saw Blade with Multi-Hole Base and
Different Segment Width
Y.N. Hu, C.Y. Wang, S.S. Hu, B.D. Chen and C.X. Chen 369
Specific Energies in Sawing with Diamond Segments and Grinding of a Diamond Segment
Y.Q. Yu, Y. Li and X.P. Xu 375
Fundamental Study on Diamond Spherical Shell Film for Polishing of Concave Spherical
Surface
D.S. Li, D.W. Zuo, R.F. Chen, Y.L. Sun, B.K. Xiang and W.Z. Lu 380
Technique Project and Theoretic Research on Surface Finishing to the Wheel Hub
W.H. Li, S.Q. Yang and S.C. Yang 385
Experimental Research on Aluminum Alloy Blade’s Surface Roughness of Integrate Rotor
Based on Four-Axis High Speed Milling
G.B. Bu, C. Zhao and D.W. Zuo 390
Research on Micro Characteristics of Surface and Subsurface Layer in Two-Dimensional
Ultrasonic Grinding Nano-Composite Ceramics
B. Zhao, G.F. Gao, Y. Wu and F. Jiao 395
Study on Surface Performance of Carbon-Aluminum-Carbon Electrode of Super-Capacitor
in Dry WEDM
Y.F. Guo, J.C. Bai, L.Q. Li and C.J. Li 401
Surface Roughness in High Feed Turning with Wiper Insert
Z.Q. Liu, P. Zhang, P. Guo and X. Ai 406
Influence of Turning by Burnishing on Surface Integrity to Analyze Feasibility of Hybrid
Process
F.L. Li, W. Xia, Z.Y. Zhou and T. Zhang 411
Study on Dry WEDMed Surface Quality of Mould Steel
T. Wang, X.F. Zhang and X.F. Zhao 416
Study on Influencing of Technological Parameter with Tools Wear during Turning
Fluorophlogopite Glass-Ceramics
L.J. Ma 421
Wear Characteristics of Micro-Diameter Cutter in High Speed Machining Micro Parts
Q.S. Bai, C.L. Yang, Y.C. Liang, L.D. Tong and Y. Zhao 425
Influences of SiC Particle Size and Content on the Mechanical Properties and Wear
Resistance of the Composites with Al Matrix
Y.Y. Tao, X.L. Ge, X.J. Xu and Z. Jiang 430
Tool Wear in High-Speed Milling of Ti-6Al-4V Alloy
S. Zhang, J.F. Li, F.S. Liu and F. Jiang 435
Study on Erosion Wear Mechanism of SiC/(W,Ti)C Gradient Ceramic Nozzle Material
L.L. Liu and J.X. Deng 440
Analysis of Optimal Clamping Schemes for Aero-Multi-Frame Monolithic Components
H. Guo, D.W. Zuo, G.X. Tang, M. Wang and Y.J. Guo 445
Model and Simulation of Slurry Velocity and Hydrodynamic Pressure in Abrasive Jet
Finishing with Grinding Wheel as Restraint
C.H. Li, Y.L. Hou, S.C. Xiu and G.Q. Cai 449
Research on Dynamic Physical Simulation of HSC Comprehensive Characteristics
D.C. Xu, P.F. Feng, J.F. Zhi, D.W. Yu and Z.J. Wu 454Key Engineering Materials Vols. 375-376 e
Study on Impact Disrepair Mathematic Model and Groove Optimization of Cutting Tools
for Machining Carbon Structural Steel
Y.N. Cheng, Z.J. Li, Y.G. Zhao and W.J. Sun 459
Theoretical Model of Surface Roughness for Polishing Super Hard Materials with Abrasive
Waterjet
C.L. Che, C.Z. Huang, J. Wang, H.T. Zhu and Q.L. Li 465
A Study of Exit-Burr Formation Mechanism Using the Finite Element Method in MicroCutting of Aluminum Alloy
D. Lu, J.F. Li, Y.M. Rong, J. Sun, J. Zhou and Z.Q. Wang 470
Building and Simulation of the Digital Polishing Path of Mold Free-Curved Surface
J.F. Ding, K.H. Zhang, G.Y. Mei and F.J. Yu 474
Study on the Correlativity between Grinding Parameters and Surface Residual Stresses in
Ceramic
G.X. Zhang, B. Lin and Z.P. Shi 480
Control and Analysis of Nonlinear Error for 5-Axis Machining of Hybrid Machine Tool
H. Shi, W. Xu and G.Q. Cai 485
Fractal Characterization and Simulation of Surface Microtopography Machined with
Abrasive Jet Precision Finishing with Grinding Wheel as Restraint
F. Liu, Y.D. Gong, C. Ke and G.Q. Cai 490
Studying the Expansion Uniformity of Intravascular Stents by the Effect of Laser Cutting
Error
J. Yang, N. Huang and Q.X. Du 495
Gap Phenomena of Ultrasonic Vibration Assisted Electrical Discharge Machining in Gas
Q.H. Zhang, J.H. Zhang, S.P. Su and Q. Gao 500
A Micro Milling Model Considering Metal Phases and Minimum Chip Thickness
J.S. Wang, J.S. Shi, Y.D. Gong, G. Abba and G.Q. Cai 505
Simulation of Surface Topography in Ball-End Milling Considering the Tool Deflection and
Runout
J. Zhao, X. Ai, W.Y. Fang and S.G. Han 510
Tool Cutting Force Modeling in High Speed Milling Using PSO-BP Neural Network
J.X. Zheng, M.J. Zhang and Q.X. Meng 515
Investigation on Simulation for Grind-Hardening Temperature Field of Non-Quenched and
Tempered Steel
S.S. Li, B. Xiao, S.X. Qin, Z.H. Song, H.H. Su and H. Gong 520
Study on the Temperature Field of Cemented Carbide Substrate in Miniature EACVD
System
H.X. Wang, D.W. Zuo, W.Z. Lu, F. Xu, D. Zeng and J.L. Shen 525
The Research of Remote Monitoring and Intelligent Maintenance System for Large Asphalt
Mixing Plant
S.L. Song, C.Y. Xiao, Q.C. Zhou, W.L. Li, Y.Q. Tang, X.X. Liu and T. Feng 530
Recognition for Spindle Speeds of Drill Press Based on Sound Signals Produced from
Drilling
X.F. Li, G.L. Yang and D.W. Zuo 535
Precision Enhancement of Ucp710 5-Axis Machine Tool by Real Time Thermal Error
Compensation
X.S. Wang, J.H. Shen and J.G. Yang 539
Study on Checking and Measurement of Double-Ball Bar for Thermal Error of CNC
Machine Tools
Y.X. Li, Y.Y. Li, H.T. Cao, Y.Q. Jin and J.G. Yang 544
The Influence of Thermocouples on the Measurement of Grinding Temperatures
C.F. Fang, H. Huang and X.P. Xu 549
Detection of the Tool Wear Condition Based on the Computer Image Processing
Y.L. Wang, S.M. Ji, L. Zhang, S.S. Jin and Y. Chen 553
On-Machine Measurement for Touch-Trigger Probes and its Error Compensation
X.M. Qian, W.H. Ye and X.M. Chen 558
Prediction of Multiple Frequencies Chatter Stability in High-Speed Milling System
Q.H. Song, X. Ai, W.X. Tang and Y. Wan 564
The Study of Five-Axis Graphic Simulation by Swept Volume Algorithm
L.Q. Zhang, Y.H. Wang and M. Chen 569f Advances in Machining & Manufacturing Technology IX
A Cutting Process Parameter Optimization Expert System for Difficult-to-Cut Materials
Z.B. Wang, Z.J. Li and D.H. Zhu 574
Calculation and Optimization of Cutter Position for Flank Milling Spatial Cam Based on
NURBS
R.Y. Ge, X.Y. Feng and X.C. Song 578
A Study on Fractal Dimension of Grit Protrusion Topography of Diamond Grinding Wheel
J. Xie and Y.G. Zhong 583
A Terminal Sliding Mode Tracking Control Algorithm for Mobile Robots
Y.H. Zhao, J.P. Zhou and R.F. Chen 588
Safety Prediction of High Speed Face Milling Cutter with Indexable Inserts
B. Jiang, M.L. Zheng, F. Xu and Y.G. Li 593
Study on the Wavelet Transform Based Monitor Signal Processing Method for Grinding
Wheel Dull
G.J. Liu, Q. Wang and R.K. Kang 598
Numerical Analysis on the Process of Laser Continuous Peen Forming of Metal Plate
S.Q. Jiang, J.Z. Zhou, S. Huang, J.J. Du, Y.Q. Sun and J.C. Yang 603
Automatic Testing Equipment and Experiments Based on the Quantitative Shadow Method
for Measuring Sub-Nanometer Deformations on Aspheric Surface
K. Xin, W. Zuo and J.F. Zhi 608
Study on Balance Precision of Ultra-High Speed CBN Grinding Wheel System
S.C. Xiu, J. Liu, C.H. Li and G.Q. Cai 614
Analysis of the Effects of Multi-Clamps Fixture on Workpiece Location Errors
G.H. Qin, S.P. Sun, Z.X. Chen, T.J. Wu and Z.Q. Ao 619
Study on Fuzzy Data Fusion for Real-Time Intelligent Recognition of Tool Wear State
B.Y. Ye, J.P. Liu, R.T. Peng, L.Y. Xu and X.Z. Zhao 626
Static and Dynamic Analysis of Carbon Nanotube Cantilever Based on Molecular Dynamics
Simulation
N. Gong, Y.C. Liang, Y.X. Yao and B.G. Liu 631
Clamping Behaviour of Modern Jaw-Chuck with Centrifugal Force Compensation during
High Speed Turning
P.F. Feng, D.W. Yu, Z.J. Wu and E. Uhlmann 636
Design and Simulation of Spring-Driven Lock-Unlock Mechanism for Spaceborne Flexible
Appendages
B.H. Wu and Z.Q. Deng 643
On the Dynamics of Piezoelectric-Driven Stick-Slip Actuator
X.B. Chen, D. Kong and Q.S. Zhang 648
The Effect of Clamping Force on Static and Dynamic Characteristics of Spindle-Tooling
System
W.G. Wu, G.C. Wang, C.G. Shen, L.J. Ma and S.L. Wang 653
Experimental Study of the Ultrahigh Speed Grinding Spindle System with a Squeeze Film
Damper
T.B. Yu, Y.D. Gong, S. Liang, G.Q. Cai and W.S. Wang 658
Research on Dynamic Cutting Performance of High Speed Face Milling Cutter
M.L. Zheng, B. Jiang, J. Liu and C.Y. He 663
Cutter Selection in the Milling of Thin-Web Components Considering the Machining
Errors Control
K. Wu and N. He 667
Experimental Research on Machining Performance of Parallel Machine Tool
H.B. Wu, D.W. Zuo and Y.W. Liu 672
Design of Energy-Controllable Pulse Generator on Micro WEDM
G.X. Chi, G.H. Cao, S.C. Di and Z.L. Wang 677
Design of the Intelligent Turning Tool System with Adjustable Tool Geometry
W.G. Wu, Z.Q. Liu and Y.P. Cheng 681
Design of Rapid Powder Switch in Laser Cladding Rapid Manufacturing
M. Wang, D.W. Zuo, M. Wang, S.H. Shi and C. Yao 686
Investigation on Strain Films in the Thin Film Resistance Strain Gauge
R.F. Chen, D.W. Zuo, Y.L. Sun, D.S. Li, W.Z. Lu and M. Wang 690Key Engineering Materials Vols. 375-376 g
Development of the High Efficient Scanning Mechanism Using in Optical Space Remote
Sensor
H.Y. Yu, X.Z. Han, Z.J. Liu and S.F. Tang 695
Research on Asymmetric and Negative Offset Mechanism of Large-Scale Steel Plate Rolling
Shear
Y.G. Li, L.F. Ma, Q.X. Huang and S.Q. Pang 700
Development of Vision Guided Grinding System for Diamond Turning Tools
Z.J. Qiu, L.B. Zhou, H. Eda, T. Imai and M. Yamada 705
Study on the Distance between the Substrate and Hot Filament in the Development of
Diamond Coated Cutting Tools
M. Chen, W.M. Lin and H. Ohmori 710
Research on Energy-Saving EDM Pulse Power Supply
Y.K. Wang, B.Y. Song, Z.L. Wang and W.S. Zhao 714
Post-Processing Development of a New PTS-X Hybrid Kinematics Machine
X.J. Yang, B. Li and D.L. Zhang 719
Research on the Influence that Stop Position of Cerpet Tufting Machineto Yarn Tension
and the Method of Elimination Stop Mark
Z. Meng, J.J. Sun, T.Z. Zhou and S.H. Gu 724
Research on a Framework of Agent-Based Collaborative Job-Shop Scheduling
G.M. Jiao, D.W. Zuo and M. Wang
x
3-D Complex Groove Insert 206
5-Axis Machine Tool 539
5-Axis Machining 485
A
Abrasive Jet 449, 490
Abrasive Water Jet 465
Abrasive Waterjet Machining 62
Acoustic Emission (AE) 369
Acoustic Emission Signals 598
Adhesive Strength 138
Aero-Multi-Frame Components 445
Agent 729
Air-Cooling 197
Air Damping 631
Al2O3+13wt%TiO2 348
Aluminum Alloy 390
Aluminum Alloy 7050-T7451 31
Application 47
Arc Envelope Ginding Method
(AEGM)
201
Artificial Neural Network (ANN) 515
ASP 530
Asphere 274
Aspherical Surface 608
Asymmetric 700
Automatic Control Technology 588
Automatic Quantitative Shadow
Method
608
Axial Reinforcement 107
Axial Tensile Properties 107
B
Backstepping 588
Balance Precision 614
Ball-End Mill 510
Ball-Spinning 358
Bending Deformation 57
Bias-Enhanced HFCVD 710
Bidding 729
Block Electro 303
Boron-Doped 138
Brittle-Ductile Transition 11, 52
Brittle Material 62
Browser 530
Burnishing 308
C
Carbon-Aluminum-Carbon
Electrode
401
Carbon Fiber Reinforced Plastic
(CFRP)
236
Carbon Nanotubes (CNT) 631
Carpet Tufting Machine 724
CBN Grinding Wheel 614
CBN Honing Wheel 226
Cemented Carbide 138
Cemented Carbide Cutting Tool 710
Cemented Carbide Tool 525
Ceramic Coating 323
Ceramic Die Materials 133
Ceramic Materials 440
Ceramic Tool Material 97, 128
Cerment Cladding Part 118
Cermet 102, 163
Chamfer Angle 187
Chamfer Width 187
Chatter 564
Checking 544
Chemical Mechanical Polishing
(CMP)
278, 283, 293
Chemical Vapor Deposition
(CVD)
216, 380
Chip Formation 26, 172
Clamping 445
Clamping Force 653
Clamping Sequence 619
Classical Laminate Theory 107
Coaxial Powder-Feed Cladding 338
Cold Roll 364
Colloidal Silica (SiO2) 278
Combination Process 248
Compensation 539
Compensation of Centrifugal
Forces
636
Composition 133
Computation Model 636
Computer Aided Design (CAD) 353
Concave Spherical Surface 380
Condition Detection 553
Conductive Layer 313734 Advances in Machining & Manufacturing Technology IX
Conflict 729
Constitutive Constants 182
Contact Analysis 226
Coolant 172
Critical Condition 52
Critical Depth of Cut 206
Critical Federate 206
Crystal Lattice Distortion 395
Cutter 667
Cutter Design 158
Cutter Failure 593
Cutter Path 485
Cutting 425
Cutting Fluid 158
Cutting Force 177, 231, 505,
663
Cutting Force Modeling 515
Cutting Life 177
Cutting Mechanism 42
Cutting Model 11
Cutting Parameters 26
Cutting Performance 128, 710
Cutting Regime 168
Cutting Speed 231, 390
Cutting Tool Material 163, 168
Cutting Tool System 681
Cutting Tools 92, 102
CVD Diamond Film 92
Cylindric Indenter 17
D
DC Plasma 216, 380
Deburring 385
Deburring Technology 67
Deformation Test 608
Deposition Processing
Optimization
710
Deterministic Optics
Manufacturing
274
Diamond Cutting 211
Diamond Film 123, 525
Diamond Grinding Wheel 583
Diamond Saw Blade 369
Diamond Segment 375
Diamond Spherical Shell Film 380
Diamond Spherical Shell Thick
Film
216
Diamond Thin Film 138, 710
Diamond Turning Tool 705
Difficult-to-Cut Materials 574
Difficult-to-Machine Material 177
Dispersion 113
Double Ball Bar 544
Dressing 583
Drill Press 535
Drilling 67
Dry WEDM 416
Dynamic Characteristics 653
Dynamic Clamping Force 636
Dynamic Cutting Performance 663
Dynamic Physical Simulation 454
Dynamic Property 631
Dynamics 648
E
ECM 298
EDM Pulse Power Supply 714
Electric Discharge Machining
(EDM)
77, 303
Electrical Machining 298
Electrical Tree 36
Electro Discharge Machining
(EDM)
248, 298, 313
Electrochemical Finishing 308
Electrochemical Machining
(ECM)
72, 318
Electroforming 148
Electromechanical Properties 690
Electroplated Interlayer 92
Engineering Ceramics 263
Engineering Performance 133
Erosion Wear 440
Error Compensation 558
Exit-Burr 470
Experiment 82
Expert System 574
F
Fabrication Technology 97
Face Milling Cutter 663
Fe 525
Feed 390
Feed-Direction Burr 67
FEM Dynamic Characteristics 369
Finish Cut 416
Finish-Tool 308
Finishing 449
Finite Element Analysis (FEA) 454
Finite Element Model (FEM) 82, 470, 480Key Engineering Materials Vols. 375-376 735
Finite Simulation 520
Five-Axis 569
Fixed Abrasive Multi-Wire Saw 1
Flank Milling 578
Fluorophlogopite 421
Formation Mechanism 470
Fractal Dimension 490, 583
Fractal Geometry 328
Free Abrasive Multi-Wire Saw 1
Free Abrasives 268
Free Curved Surface 474
Free-Form Surfaces 308
Frequency Response Function
(FRF)
564
Friction 328, 648
Friction Torque 221
Function of Magnetic Field 6
Functionally Graded Material
(FGM)
440
Fuzzy Data Fusion 626
Fuzzy Restoration Arithmetic 553
G
Gap Voltage Control 677
GCr15 187, 197
GH4169 221
Glas Ceramics 421
Glass 211, 268
Glass Cracks 17
Glass Cutting 17
Grain Refining 153
Graphic Simulation 569
Gray Co-Occurrence Matrix 553
Green Cutting 158, 172
Green Manufacturing 158
Grind-Hardening 520
Grinding 303, 375, 549,
705
Grinding Ceramic 480
Grinding Force 258
Grinding Point 201
Grinding Wheel Dull Degree 598
Grinding Wheel Spindle 658
Grit Protrusion Topography 583
Groove Optimization 459
H
Hard Cutting 192
Hard Dimples 364
Hard Turning 187
Hardened Layer Depth 520
Hardness 333
Heat Affected Zone (HAZ) 333
Heat Density Function 241
HFCVD 123
High Efficient Scanning 695
High Feed Turning 406
High-Melting 143
High Speed Face Milling Cutter 593
High Speed Machining (HSM) 206, 515, 653
High Speed Milling (HSM) 390, 435, 564,
663
High Speed Turning 636
HSC 454
Hybrid Kinematics Machine 719
Hydrodynamic Pressure 449
I
ID Slicing 1
Image Processing 353, 553, 705
Impact Disrepair 459
Impact Pressure 465
Indentation 17
Indexable Inserts 593
Intelligent Fault Diagnosis 530
Intelligent Turning Tool 681
Interface 92
Interface Crack 118
Intravascular Stent 495
Intrinsic Stress 123
Irregular Heat Source 241
J
Jaw-Chuck 636
Job Shop Scheduling 729
L
Laser Texturing 328, 364
Laser Cladding 338
Laser Coating 364
Laser Compound Forming 343
Laser Peen Forming 603
Laser Shot Peening 57
Laser Sintering 348
Least Square Optimization 578
Length of Trajectory 201
Lithium Tantalite Crystal 293736 Advances in Machining & Manufacturing Technology IX
Local Resonance 258
Lock-Unlock Mechanism 643
Loop-Height 724
Lower Working Voltage 303
LTCC 47
Lubricant 172
M
Machinable Ceramics 421
Machine Tool 544
Machining 21, 82
Machining Accuracy 672
Machining Center 558
Machining Mechanism 62
Machining Performance 672
Magnetic-Electrochemical
Compound Polishing
6
Magnetorheological Finishing
(MRF)
274, 608
Mastercam Simulation Process 474
Material Removal Mechanism 500
Material Removal Rate (MRR) 263
Mathematical Model 6, 206
Measurement 539, 544
Mechanical Property 133, 148, 430
Mechanism 36
Mechanochemical Modification 87
Medical Implant 353
Metal Phases 505
Metal Plates 57, 603
Metallurgical Bonding 153
Micro-Arc Oxidation (MAO) 323
Micro Cutting 31, 470
Micro Device 253
Micro Diameter Cutter 425
Micro EDM Deposition 153
Micro Electroforming 253
Micro-Fluidic 47
Micro Groove 358
Micro Heat Pipe 358
Micro-Hole 77, 248
Micro Machining 248, 318
Micro-Milling 505
Micro Parts 425
Micro WEDM 677
Microelectrode 298, 303
Microhardness 338
Microstructure 102, 128, 318,
338
Microstructure Characterization 153
Mild Steel 406
Milling 318, 667
Miniature EACVD System 525
Miniaturized 77
Minimum Chip Thickness 505
Mobile Robot 588
Model 449, 648
Modeling 500
Modified-Tooth Tap 221
Mold 474
Molding Technique 288
Molding Test 288
Monte-Carlo 495
Multi-Clamps Fixture 619
Multi-Phase 113
Multi-Scale 113
Multi-Tooth Mandrel 358
Multidirectional Filament Wound
Tubes
107
Multiple Clamping Forces 619
N
Nano-Composite 113
Nano-Composite Ceramic 395
Nano-Scale 128
Nanoceramic 258
Nanocrystalline 148
Nanodiamond 87
Nanoelectromechanical Systems
(NEMS)
631
Nanoindention 52
Nanostructured Coating 348
Nd:YAG Ceramics 278
Negative Offset 700
Neural Network (NN) 535, 626
Ni-Mn Alloy 148
Nichrome Thin Film 690
Nickel-Based Super Alloy 82
Non-Quenched Steel 520
Nonlinear Error 485
Nozzle 440
Numerical Controlled Contour
Evolution
72
Numerical Simulation 182, 343, 603
NURBS Ruled Surface 578
O
Oblique Cutting 192
On-Machine Measurement
(OMM)
558Key Engineering Materials Vols. 375-376 737
Optical Space Remote Sensing 695
Optimization 574
Orthogonal Cutting 182, 192
Orthogonal Experiment 97
Orthogonal Test 338
Orthogonal Turning 26
P
Pad Conditioning 293
Parallel Kinematics Machine Tool 672
Particle Swarm Optimization
Algorithm (PSO)
515
PCBN 187
PCBN Tools 197
Performance of Coating 323
Piezoelectric Actuator 648
Plasma 36
Plasma Spraying 348
Plastic Deformation 411
Polishing 47
Polishing Pad 278
Polishing Path 474
Polishing Process 465
Polycrystal Cubic Boron Nitride 168
Polyimide Polishing Film 288
Polyurethane 293
Post-Processing 719
Powder 36
Powder-Mixed EDM 36, 143
Power Factor Correction (PFC) 714
Precision Finishing 490
Precision Machining 67, 411
Process Method 598
Process Parameter 574
Processing Technology 133
Pulse Addition 677
Pulse Parameter 333
Pulse Width Modulation 714
Pulsed Laser Forming 333
R
Randomization 495
Rapid Power Switch 686
Rapid Prototyping (RP) 353
Recognition of Tool Wear State 626
Regression Analysis 539
Remote Intelligent Maintenance 530
Residual Stress 57, 343, 395,
480
Reverse Engineering (RE) 343, 353
Revolving Curved Surface 201
Roller Burnishing 411
Rolling Shear 700
S
Safety of Cutter 593
Saving Energy 714
Saw-Tooth Chip 82
Sawing 375
Scanning Electron Microscope
(SEM)
288
Scanning System 695
Serial 495
Server 530
Severe Plastic Deformation (SPD) 21
Shaping Law 72
Shear Quality 700
Shock Wave Pressure 603
SiC/(W,Ti)C 440
SiCp/Al Composite 430
Silane Coupling Agent 87
Silicon Carbide (SiC) 348
Silicon Nitride Ceramics 283
Silicon Wafer 1
Simulation 449, 643, 681
Single Crystal Silicon 11
Single-Point Scratch 263
Single Silicon Wafer 52
Size Effect 31
Slurry Velocity 449
Solid-Phase Reaction 283
Sound Signal 535
Spark Plasma 500
Spatial Cam 578
Specific Energy 375
Speed Coefficient 42
Spindle 653
Spindle Speed 535
Spiral Spring 643
Splines 226
Squeeze Film Damper 658
Stability Limit 564
Stainless Steel 172
Standard Tap 221
Static Properties 631
Stick-Slip 648
Stirring Plant 530
Stop Mark 724738 Advances in Machining & Manufacturing Technology IX
Stopping Machine in High 724
Stray Capacitance 677
Stress Deformation 445
Stress Field 459
Stress Intensity Factor (SIF) 118
Substrate Temperature Field 525
Super Capacitor Electrode 401
Superalloy 172
Surface Deterioration Layer 395
Surface Finish 385
Surface Generation 505
Surface Integrity 411
Surface Morphology 490
Surface Performance 401
Surface Properties 143
Surface Roughness (SR) 278, 328, 380,
390, 406
Surface Roughness Model 465
Surface Topography 253, 510
Swept Volume 569
Synchronization of Laser 686
Synchronization of Powder 686
Synchronous Control 686
Synchronous Process 308
System Design 308
T
Ta-W Alloy Material 143
Taguchi Method 236, 411
Tapping Torque 221
TC4 221
Techniques 323
Temperature 549
Temperature Field 520
Tempered Steel 520
Terminal Sliding Mode 588
Test 614
Thermal Deformation 158
Thermal Error 544
Thermal Stress 123
Thermocouple 549
Thin Film Resistance Strain Gauge 690
Thin-Web 667
Three-Dimensional FEM 192
Three-Dimensional Groove 241
Thrust Force 236
Ti6Al4V 231
Ti6Al4V Alloy 435
TiAl 172, 182
TiCN Based 163
Tool Deflection 510
Tool Edge Radius 31
Tool Geometry 26, 681
Tool Runout 510
Tool Wear 211, 231, 421,
435, 553
Tooth Profile Modification 226
Torsion Spring 643
Touch-Trigger Probe 558
Trajectory Tracking 588
Turning 163, 168, 421
Twist Drill 236
Two Dimensional Ultrasonic
Vibration Grinding (TDUVG)
395
U
UEDM 500
Ultra-Fine Grain Material 21
Ultra-Fine Powder 102
Ultra-High Speed Grinding 614, 658
Ultra-Precision Turning 11
Ultrafine Grained 177
Ultrasonic Agitation 253
Ultrasonic Aided Lapping 263
Ultrasonic Grinding 258
Ultrasonic Machining 268
Ultrasonic Motor 77
Ultrasonic Vibration Cutting 211
Uniformity 385, 495
USM 248
V
VC 574
Velocity Equation 6
Vibration 658
Vibration Cutting 42
Vision Feedback Control 705
Vortex Tube 197
W
Water Vapor 172
Waved-Edge Milling Insert 177
Wavelet Analysis 626
Wavelet Decomposition 535
Wavelet Package Decomposition 535
Wavelet Transform (WT) 598
Wear 328, 358
Wear Characteristics 425Key Engineering Materials Vols. 375-376 739
Wear Mechanisms 231
Wear Resistance 430
WEDM 1
Weibull Distribution 459
Wheel Hub 385
Wheel Steel 26
Wheel Wear 201
Wiper Insert 406
Wire Electrical-Discharge
Machining in Gas (Dry WEDM)
401
Wire Winding Speed 416
Workpiece Location 719
Workpiece Location Error 619
Worktable Feed 416
X
X-Ray Diffraction (XRD) 480
XPS 87
Y
Yarn Tension 724
Z
Zero Voltage Switching (ZVS) 714
ZrO2 Assisting Electrode
Authors Index
A
Abba, G. 505
Ai, X. 231, 406, 510,
564
Ang, S.S. 47
Ao, Z.Q. 619
B
Bai, J.C. 313, 401
Bai, Q.S. 425
Bu, G.B. 390
C
Cai, G.Q. 449, 485, 490,
505, 614, 658
Cao, G.F. 172
Cao, G.H. 677
Cao, H.T. 544
Che, C.L. 62, 465
Chen, B.D. 369
Chen, C.T. 278
Chen, C.X. 369
Chen, J.L. 182
Chen, M. 26, 82, 138,
569, 710
Chen, R.F. 52, 216, 380,
588, 690
Chen, T. 187
Chen, W.L. 102
Chen, X.B. 648
Chen, X.M. 558
Chen, Y. 553
Chen, Y.B. 343
Chen, Y.C. 42
Chen, Y.Q. 6
Chen, Z.X. 619
Cheng, Y.N. 459
Cheng, Y.P. 681
Chi, G.X. 677
D
Dai, J. 201
Deng, G.Q. 313
Deng, J.X. 440
Deng, W.J. 17, 21, 358
Deng, Z.Q. 643
Di, S.C. 677
Ding, J.F. 474
Du, J.J. 57, 343, 603
Du, Q.X. 495
E
Eda, H. 705
F
Fan, S.T. 67
Fang, B. 97
Fang, C.F. 549
Fang, W.Y. 510
Feng, P.F. 454, 636
Feng, T. 530
Feng, X.Y. 578
Feng, Y.M. 133
Fu, T. 163
G
Gao, G.F. 258, 395
Gao, Q. 303, 500
Ge, R.Y. 578
Ge, X.L. 430
Gong, H. 520
Gong, N. 631
Gong, Y.D. 490, 505, 658
Gu, L.Z. 42
Gu, S.H. 724
Guo, H. 445
Guo, H.F. 338
Guo, P. 406
Guo, Y.F. 313, 401
Guo, Y.J. 445
Guo, Z.N. 77
H
Han, R.D. 172, 221
Han, S.G. 510
Han, X.Z. 695
He, C.Y. 663
He, N. 667
Hou, Y.L. 449Key Engineering Materials Vols. 375-376 741
Hu, D. 143
Hu, D.J. 328, 364
Hu, F.Q. 143
Hu, J.S. 197
Hu, J.T. 168
Hu, S.S. 369
Hu, Y.N. 369
Hu, Y.Y. 253
Hua, G.R. 348
Huang, C.Z. 62, 97, 113,
118, 128, 465
Huang, H. 549
Huang, N. 495
Huang, Q.X. 700
Huang, S. 57, 343, 603
Huang, Y.H. 348
I
Imai, T. 705
J
Ji, S.M. 553
Ji, X. 57, 338
Jia, B.X. 248, 298
Jiang, B. 593, 663
Jiang, F. 435
Jiang, S.Q. 603
Jiang, Y.M. 107
Jiang, Z. 430
Jiang, Z.G. 158
Jiao, F. 263, 395
Jiao, G.M. 729
Jin, B.D. 153
Jin, S.S. 553
Jin, Y.Q. 544
Ju, J.B. 221
K
Kang, G.W. 274
Kang, M. 72
Kang, R.K. 598
Ke, C. 490
Kong, D. 648
Kong, L.Y. 201
Kong, Q.H. 258
L
Li, B. 719
Li, C.H. 449, 614
Li, C.J. 401
Li, D.C. 353
Li, D.S. 52, 216, 380,
690
Li, F.L. 411
Li, J. 278
Li, J.F. 31, 182, 435,
470
Li, L.Q. 323, 401
Li, Q.F. 67
Li, Q.L. 62, 465
Li, S.S. 520
Li, T.T. 231
Li, W.H. 385
Li, W.L. 530
Li, X.B. 358
Li, X.F. 535
Li, X.H. 318
Li, Y. 21, 358, 375
Li, Y.F. 192
Li, Y.G. 593, 700
Li, Y.N. 177
Li, Y.X. 544
Li, Y.Y. 544
Li, Z.J. 177, 206, 459,
574
Li, Z.Q. 118
Liang, S. 658
Liang, Y.C. 425, 631
Lin, B. 480
Lin, W.M. 710
Liu, B. 163
Liu, B.G. 631
Liu, C.S. 263
Liu, D.X. 197
Liu, E.L. 6, 206
Liu, F. 490
Liu, F.S. 435
Liu, G. 26, 82
Liu, G.J. 598
Liu, H.B. 328, 364
Liu, H.L. 97, 113, 128
Liu, J. 172, 614, 663
Liu, J.P. 626
Liu, L.L. 440
Liu, N. 102
Liu, Q. 241
Liu, X.L. 187, 192, 197
Liu, X.X. 530742 Advances in Machining & Manufacturing Technology IX
Liu, Y. 36
Liu, Y.W. 672
Liu, Y.X. 353
Liu, Y.Z. 197
Liu, Z.J. 695
Liu, Z.Q. 406, 681
Lu, B.H. 353
Lu, D. 470
Lu, J.Y. 42
Lu, W.Z. 92, 123, 216,
380, 525, 690
Lu, Z.S. 11, 313
Luo, X. 158
Lv, B.H. 283
Lv, M. 226
M
Ma, L.F. 700
Ma, L.J. 421, 653
Mei, G.Y. 474
Meng, Q.X. 241, 515
Meng, S.S. 168
Meng, Z. 724
Ming, P.M. 253
O
Ohmori, H. 710
P
Pa, P.S. 308
Pang, S.Q. 168, 700
Pei, H.J. 67
Pen, H.M. 187, 192
Peng, R.T. 626
Peng, Z.L. 153
Q
Qian, K.K. 118
Qian, X.M. 558
Qin, G.H. 619
Qin, S.X. 520
Qiu, G.X. 107
Qiu, Z.J. 705
Qu, H.J. 67
R
Rong, Y.M. 470
S
Sekou, S. 353
Shen, C.G. 653
Shen, J.H. 539
Shen, J.L. 87, 525
Shen, L.D. 348
Shi, H. 485
Shi, J.S. 505
Shi, L.M. 6
Shi, S.H. 686
Shi, Z.P. 480
Song, B.Y. 714
Song, Q.H. 564
Song, S.L. 530
Song, X.C. 578
Song, Z.H. 520
Su, H.H. 520
Su, S.P. 500
Sun, F.H. 138
Sun, J. 31, 182, 470
Sun, J.J. 724
Sun, S.P. 619
Sun, W.J. 459
Sun, Y.L. 1, 52, 216,
380, 690
Sun, Y.Q. 343, 603
T
Tan, G.Y. 241
Tang, G.X. 445
Tang, S.F. 695
Tang, W.X. 564
Tang, Y. 17, 21, 358
Tang, Y.J. 77
Tang, Y.L. 221
Tang, Y.Q. 530
Tao, Y.Y. 430
Tian, Z.J. 348
Tong, F.Q. 42
Tong, L.D. 425
Tsao, C.C. 236
U
Uhlmann, E. 636
W
Wan, D.P. 328, 364Key Engineering Materials Vols. 375-376 743
Wan, Y. 564
Wan, Z.P. 17, 21
Wang, B.C. 87
Wang, C. 82
Wang, C.Y. 369
Wang, D.S. 248
Wang, G.C. 67, 653
Wang, H. 113
Wang, H.F. 364
Wang, H.X. 525
Wang, J. 62, 353, 465
Wang, J.F. 318
Wang, J.S. 505
Wang, M. 52, 92, 123,
216, 445, 686,
686, 690, 729
Wang, M.H. 11
Wang, P. 107, 192
Wang, Q. 598
Wang, S.L. 653
Wang, T. 416
Wang, T.S. 168
Wang, W.P. 353
Wang, W.S. 658
Wang, X.Q. 231
Wang, X.R. 318
Wang, X.S. 539
Wang, Y. 172, 192, 333
Wang, Y.G. 36
Wang, Y.H. 569
Wang, Y.K. 714
Wang, Y.L. 553
Wang, Z.B. 574
Wang, Z.G. 177
Wang, Z.L. 77, 143, 153,
248, 298, 303,
318, 677, 714
Wang, Z.Q. 182, 470
Wei, G.L. 206
Wei, X. 293
Wu, B.H. 643
Wu, C.Y. 187
Wu, H.B. 672
Wu, K. 667
Wu, M.Y. 241
Wu, T.J. 619
Wu, W.G. 653, 681
Wu, Y. 395
Wu, Y.G. 163
Wu, Z.J. 454, 636
X
Xi, J.J. 323
Xia, W. 21, 411
Xia, X.Q. 102
Xiang, B.K. 216, 380
Xiang, D.H. 258
Xiao, B. 520
Xiao, C.Y. 530
Xiao, G.C. 133
Xiao, S.R. 113
Xie, J. 583
Xie, X. 107
Xie, X.Z. 293
Xin, K. 608
Xiong, W. 293
Xiu, S.C. 449, 614
Xu, A.F. 107
Xu, C.H. 97, 133
Xu, D.C. 454
Xu, D.P. 338
Xu, F. 92, 123, 525,
593
Xu, J.W. 72
Xu, L.Y. 626
Xu, Q. 283
Xu, W. 485
Xu, X.C. 288
Xu, X.J. 430
Xu, X.M. 26
Xu, X.P. 268, 375, 549
Xu, X.Y. 87
Xu, Z.P. 31, 182
Xue, K. 26
Y
Yamada, M. 705
Yan, F.G. 187
Yan, Q.S. 201
Yang, C.J. 57
Yang, C.L. 425
Yang, G.L. 535
Yang, H.D. 102
Yang, J. 495
Yang, J.C. 603
Yang, J.G. 539, 544
Yang, J.M. 148
Yang, J.R. 118
Yang, L.J. 333744 Advances in Machining & Manufacturing Technology IX
Yang, S.C. 385
Yang, S.Q. 226, 385
Yang, X.J. 719
Yao, C. 686
Yao, C.Z. 138
Yao, Y.X. 323, 631
Ye, B.Y. 626
Ye, W.H. 558
Yu, D.W. 454, 636
Yu, F.J. 474
Yu, H.Y. 695
Yu, J.W. 113
Yu, Q.X. 163, 168
Yu, T.B. 658
Yu, Y. 143
Yu, Y.Q. 375
Yuan, H. 293
Yuan, J.L. 47, 283
Yuan, Z.J. 288
Yue, C.X. 197
Z
Zeng, D. 525
Zeng, W.L. 303
Zeng, Y.B. 253
Zeng, Z.X. 358
Zhang, C.G. 102
Zhang, D.J. 82
Zhang, D.L. 719
Zhang, F.H. 42, 274
Zhang, G.X. 480
Zhang, H. 143, 158
Zhang, H.P. 206
Zhang, H.Y. 123
Zhang, J.H. 500
Zhang, J.Y. 168
Zhang, K.H. 474
Zhang, L. 553
Zhang, L.Q. 569
Zhang, M.D. 226
Zhang, M.J. 515
Zhang, P. 406
Zhang, Q.H. 500
Zhang, Q.S. 648
Zhang, R.B. 133
Zhang, S. 435
Zhang, T. 411
Zhang, X.F. 416
Zhang, Y. 42, 172
Zhang, Y.J. 77
Zhang, Y.K. 57, 118
Zhang, Z.M. 138
Zhao, B. 258, 263, 395
Zhao, C. 390
Zhao, F.L. 36
Zhao, H. 211
Zhao, J. 231, 510
Zhao, L.G. 1
Zhao, W.S. 143, 248, 714
Zhao, X.F. 416
Zhao, X.Z. 626
Zhao, Y. 425
Zhao, Y.G. 459
Zhao, Y.H. 588
Zheng, J.X. 515
Zheng, M.L. 593, 663
Zheng, S.Y. 268
Zhi , J.F. 454, 608
Zhong, Y.G. 583
Zhou, J. 31, 470
Zhou, J.P. 588
Zhou, J.Z. 57, 338, 343,
603
Zhou, L.B. 705
Zhou, M. 211
Zhou, Q.C. 530
Zhou, T.Z. 724
Zhou, X.G. 201
Zhou, Z.Y. 411
Zhu, B.G. 298
Zhu, C.R. 283
Zhu, D. 148, 253
Zhu, D.H. 177, 574
Zhu, H.T. 62, 465
Zhu, J.J. 47
Zhu, R.M. 177
Zhu, X.S. 263
Zhu, Y. 278
Zhu, Y.M. 67
Zhu, Y.W. 87
Zou, B. 128
Zuo, D.W. 1, 52, 92, 123,
216, 380, 390,
445, 525, 535,
672, 686, 690,
729
Zuo, W.
كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net
أتمنى أن تستفيدوا من محتوى الموضوع وأن ينال إعجابكم
رابط من موقع عالم الكتب لتنزيل كتاب Advances in Machining & Manufacturing Technology IX
رابط مباشر لتنزيل كتاب Advances in Machining & Manufacturing Technology IX 
|
|
