كتاب SOLIDWORKS Tutorial - A Step-by-Step Project Based Approach
منتدى هندسة الإنتاج والتصميم الميكانيكى
بسم الله الرحمن الرحيم

أهلا وسهلاً بك زائرنا الكريم
نتمنى أن تقضوا معنا أفضل الأوقات
وتسعدونا بالأراء والمساهمات
إذا كنت أحد أعضائنا يرجى تسجيل الدخول
أو وإذا كانت هذة زيارتك الأولى للمنتدى فنتشرف بإنضمامك لأسرتنا
وهذا شرح لطريقة التسجيل فى المنتدى بالفيديو :
http://www.eng2010.yoo7.com/t5785-topic
وشرح لطريقة التنزيل من المنتدى بالفيديو:
http://www.eng2010.yoo7.com/t2065-topic
إذا واجهتك مشاكل فى التسجيل أو تفعيل حسابك
وإذا نسيت بيانات الدخول للمنتدى
يرجى مراسلتنا على البريد الإلكترونى التالى :

Deabs2010@yahoo.com


-----------------------------------
-Warning-

This website uses cookies
We inform you that this site uses own, technical and third parties cookies to make sure our web page is user-friendly and to guarantee a high functionality of the webpage.
By continuing to browse this website, you declare to accept the use of cookies.
منتدى هندسة الإنتاج والتصميم الميكانيكى
بسم الله الرحمن الرحيم

أهلا وسهلاً بك زائرنا الكريم
نتمنى أن تقضوا معنا أفضل الأوقات
وتسعدونا بالأراء والمساهمات
إذا كنت أحد أعضائنا يرجى تسجيل الدخول
أو وإذا كانت هذة زيارتك الأولى للمنتدى فنتشرف بإنضمامك لأسرتنا
وهذا شرح لطريقة التسجيل فى المنتدى بالفيديو :
http://www.eng2010.yoo7.com/t5785-topic
وشرح لطريقة التنزيل من المنتدى بالفيديو:
http://www.eng2010.yoo7.com/t2065-topic
إذا واجهتك مشاكل فى التسجيل أو تفعيل حسابك
وإذا نسيت بيانات الدخول للمنتدى
يرجى مراسلتنا على البريد الإلكترونى التالى :

Deabs2010@yahoo.com


-----------------------------------
-Warning-

This website uses cookies
We inform you that this site uses own, technical and third parties cookies to make sure our web page is user-friendly and to guarantee a high functionality of the webpage.
By continuing to browse this website, you declare to accept the use of cookies.



 
الرئيسيةالبوابةأحدث الصورالتسجيلدخولحملة فيد واستفيدجروب المنتدى

شاطر
 

 كتاب SOLIDWORKS Tutorial - A Step-by-Step Project Based Approach

اذهب الى الأسفل 
كاتب الموضوعرسالة
Admin
مدير المنتدى
مدير المنتدى
Admin

عدد المساهمات : 18849
التقييم : 35063
تاريخ التسجيل : 01/07/2009
الدولة : مصر
العمل : مدير منتدى هندسة الإنتاج والتصميم الميكانيكى

كتاب SOLIDWORKS Tutorial - A Step-by-Step Project Based Approach  Empty
مُساهمةموضوع: كتاب SOLIDWORKS Tutorial - A Step-by-Step Project Based Approach    كتاب SOLIDWORKS Tutorial - A Step-by-Step Project Based Approach  Emptyالجمعة 20 يناير 2023, 2:59 pm

أخواني في الله
أحضرت لكم كتاب
SOLIDWORKS Tutorial - A Step-by-Step Project Based Approach
Utilizing 3D Solid Modeling
David C. Planchard
CSWP & SOLIDWORKS Accredited Educator
SOLIDWORKS Tutorial Introduction

كتاب SOLIDWORKS Tutorial - A Step-by-Step Project Based Approach  S_w_2_26
و المحتوى كما يلي :


FABLE OF CONTENTS
Introduction 1-1
About the Author 1-2
Acknowledgements 1-3
Contact the Author 1-4
Note to Instructors 1-4
Trademarks, Disclaimer, and Copyrighted Material 1-4
References 1-5
Table of Contents 1-7
What is SOLIDWORKS? I-16
Design Intent 1-18
Overview of Chapters 1-21
About the Book 1-28
Windows Terminology in SOLIDWORKS 1-28
Chapter 1 - Overview of SOLIDWORKS and the User Interface 1-1
Chapter Objective 1-3
What is SOLIDWORKS? 1-3
Basic concepts in SOLIDWORKS 1-3
Start a SOLIDWORKS Session 1-4
Tutorial: Start a SOLIDWORKS Session 1-4
Welcome dialog box 1-4
Home Tab 1-5
Recent Tab 1-5
Learn Tab 1-5
Alerts Tab 1-6
SOLIDWORKS User Interface (UI) and CommandManager 1-7
Menu Bar toolbar' 1-8
Menu Bar menu 1-8
Drop-down menu 1-9
Create a New Pan Document 1-9
Novice Mode 1-10
Advanced Mode 1-10
Graphic Window (Default) 1-11
View Default Sketch Planes 1-12
Open a Part 1-12
Part FeatureManager 1-13
FeatureManager Rollback Bar 1-13
Heads-up View toolbar 1-15
Dynamic Annotation Views 1-15
Zoom to Fit 1-15
Zoom to Area 1-15
Window-Select 1-15
Rotate 1-15
Front View 1-16
Right View 1-16
Top View 1-16
Trimetric view 1-16
1-7Introduction SOLIDWORKS8 2020 Tutorial
SOLIDWORKS Help 1-16
SOLIDWORKS Tutorials 1-17
User Interface Tools 1-17
Right-click 1-18
Consolidated toolbar 1-18
System feedback icons 1-18
Confirmation Comer 1-19
Heads-up View toolbar 1-19
CommandManager (Default Pail tab) 1-22
CommandManager (Default Drawing tab) 1-23
CommandManager (Default Assembly tab) 1-24
CommandManager (Float/Fit) 1-25
Selection Enhancements 1-25
FeatureManager Design Tree 1-26
FeanireManager design ttee tab 1-26
PropertyManager tab 1-26
Configuration Manager tab 1-26
DimXpertManager tab 1-26
DisplayManager tab 1-26
CAM tab 1-26
Hide/Showtab 1-26
Sensors tool 1-26
Tags 1-27
Split 1-27
Fly-out Feanu eManager 1-28
Task Pane 1-29
SOLIDWORKS Resources 1-29
Design Library 1-30
File Explorer 1-30
Search 1-31
View Palette 1-31
Appearances, Scenes and Decals 1-32
Custom Properties 1-32
SOLIDWORKS Forum 1-32
User Interface for Scaling High Resolution Screens 1-32
Motion Study tab 1-33
3D Views tab 1-34
Dynamic Reference Visualization 1-34
Mouse Movements 1-35
Single-Click 1-35
Double-Click 1-35
Right-Click 1-35
Scroll Wheel 1-35
Summary 1-36
Chapter 2 - Parts and Assembly Creation 2-1
Chapter Objective 2-3
Chapter Overview 2-4
Start a SOLIDWORKS Session 2-6
AXLE Part 2-9
AXLE Part-Extruded Boss/Base Feahire 2-10
1-8SOLIDWORKS Tutorial Introduction
AXLE Part-Save
AXLE Part-Edit Appearance
AXLE Part-View Modes
SHAFT-COLLAR Part
SHAFT-COLLAR Part-Extruded Boss/Base Feature
SHAFT-COLLAR Part-Extruded Cut Feature
SHAFT-COLLAR-Modity Dimensions and Edit Color
FLATBAR Part
FLATBAR Part-Extruded Boss/Base Feature
FLATBAR Part-Extruded Cut Feature
FLATBAR Part-Linear Pattern Feature
LINKAGE Assembly
Mate Types
Standard Mates
Advanced Mates
Mechanical Mates
AirCylinder Assembly-Open and Save As option
LINKAGE Assembly-Insert FLATBAR Part
LINKAGE Assembly-Insert SHAFT-COLLAR Part
Motion Study - Basic Motion tool
LINKAGE Assembly-Basic Motion
Summary
Questions
Exercises
2-13
2-14
2-15
2-18
2-18
2-21
2-23
2-24
2-25
2-28
2-30
2-31
2-32
2-32
2-33
2-33
2-34
2-38
2-41
2-44
2-44
2-47
2-48
2-49
Chapter 3 - Front Support Assembly
Chapter Objective
Chapter Overview
Reference Planes and Orthograpliic Projection
HEX-STANDOFF Part
HEX-STANDOFF Part-Extruded Boss/Base Feature
HEX-STANDOFF Part-HOLE Wizard Feature
ANGLE-13HOLE Part
ANGLE-13HOLE Part-Documents Properties
ANGLE-13HOLE Part-Extruded Thin Feature
ANGLE-13HOLE Part-Extruded Cut Feature
ANGLE-13HOLE Part-Linear Pattern Feature
ANGLE-13HOLE Part-Fillet Feature
ANGLE-13HOLE Part-Second Extruded Cut and Linear Pattern
ANGLE-13HOLE Part-Third Extruded Cut Feature
TRIANGLE Part
TRIANGLE Part-Mirror, Offset and Fillet Sketch Tools
TRIANGLE Part-Extruded Boss/Base Feature
TRIANGLE Part-First Extruded Cut Feature
TRIANGLE Part-Second Extruded Cut Feature
TRIANGLE Part-Mirror Feature
TRIANGLE Part-Third Extruded Cut Feature
TRIANGLE Part-Circular’ Pattern Feature
SCREW Part
SCREW Part-Documents Properties
SCREW Part-Revolved Feature
3-1
3-3
3-4
3-5
3-9
3-10
3-14
3-15
3-17
3-18
3-20
3-22
3-23
3-24
3-26
3-31
3-33
3-36
3-37
3-39
3-41
3-42
3-44
3-45
3-47
3-47
1-9Introduction SOLIDWORKS8 2020 Tutorial
SCREW Part-Extruded Cut Feature
SCREW Part-Circular Pattern Feature
SCREW Part-Fillet Feature
SCREW Part-Chamfer Feature
FRONT-SUPPORT Assembly
FRONT-SUPPORT Assembly-Insert ANGLE-13HOLE
FRONT-SUPPORT Assembly-Insert HEX-STANDOFF
FRONT-SUPPORT Assembly-Insert TRIANGLE
FRONT-SUPPORT Assembly-Insert SCREW
Chapter Summary
Questions
Exercises
3-51
3-53
3-53
3-54
3-56
3-56
3-58
3-61
3-64
3-66
3-68
3-69
Chapter 4 - Fundamentals of Drawing
Chapter Objective
Chapter Overview
Drawing Template and Sheet Format
Create a new Drawing
Drawing-Document Properties
Title Block
Create a Title Block
Company Logo
Insert a Company Logo
Save Sheet Format and Save As Drawing Template
FLATBAR Drawing
FLATBAR Drawing-Open the FLATBAR Part
Move view's and Properties of the Sheet
FLATBAR Drawing-Position views
Detail Drawing
FLATBAR Drawing-Dimensions and Annotations
FLATBAR Drawing-Part Number and Document Properties
FLATBAR Drawing-Linked Note
LINKAGE Assembly Drawing-Sheet1
LINKAGE Assembly Drawing-Exploded view'
LINKAGE Assembly Drawing-Animation
LINKAGE Assembly Drawing-Bill of Materials
LINKAGE Assembly Drawing-Automatic Balloons
LINKAGE Assembly Drawing-Sheet2
LINKAGE Assembly Drawing-Sheet2 Section view
LINKAGE Assembly Drawing-Sheet2 Detail view
FLATBAR Part-Design Table
FLATBAR Drawing-Sheet2
FLATBAR-SHAFTCOLLAR Assembly
Insert a Center of Mass Point
Chapter Summary
Questions
Exercises
4-1
4-3
4-4
4-5
4-7
4-9
4-10
4-11
4-15
4-15
4-17
4-20
4-20
4-24
4-26
4-27
4-29
4-35
4-37
4-40
4-44
4-46
4-47
4-49
4-50
4-52
4-52
4-54
4-58
4-60
4-65
4-67
4-67
4-69
Chapter 5 - Advanced Features
Chapter Objective
Chapter Overview'
5-1
5-3
5-4
1-10SOLIDWORKS Tutorial Introduction
WEIGHT Part 5-6
WEIGHT Part-Lofted Feature 5-12
WEIGHT Part-Instant 3D Extruded Cut Feature 5-13
HOOK Part 5-14
HOOK Part-Swept Profile 5-20
HOOK Part-Swept Base Feantre 5-20
HOOK Part-Dome Feature 5-20
HOOK Part-Thread Feantre 5-21
WHEEL Part 5-24
WHEEL Part-Extruded Boss/Base Feantre 5-27
WHEEL Part-Revolved Cut Feanne 5-28
WHEEL Part-First Extruded Cut Feature 5-31
WHEEL Part-Second Extruded Cut Feature 5-33
WHEEL Part-Circular Pattern Feature 5-36
Modify a Part 5-39
HEX-ADAPTER Part 5-39
HEX-ADAPTER Part-Exnuded Boss/Base Feantre 5-42
HEX-ADAPTER Part-Exnuded Cut Feantre 5-42
AXLE-3000 Part 5-45
SHAFTCOLLAR-500 Part 5-46
Chapter Summary 5-49
Questions 5-50
Exercises 5-51
Chapter 6 - PNEUMATIC-TEST-MODULE and ROBOT Assembly 6-1
Chapter Objective 6-3
Chapter Overview 6-4
Assembly Techniques 6-6
PNEUMATIC-TEST-MODULE Layout 6-7
FLATBAR Sub-assembly 6-9
3HOLE-SHAFTCOLLAR Assembly 6-9
WHEEL-FLATBAR Assembly 6-16
WHEEL-FLATBAR Assembly-Insert 3HOLE-SHAFT-COLLAR 6-19
WHEEL-FLATBAR Assembly-Insert 5HOLE-SHAFT-COLLAR 6-21
WHEEL-AND-AXLE Assembly 6-25
WHEEL-AND-AXLE Assembly-Insert HEX-ADAPTER 6-28
WHEEL-AND-AXLE Assembly-Insert SHAFTCOLLAR-500 6-30
PNEUMATIC-TEST-MODULE Assembly 6-32
Modify the LINKAGE Assembly 6-33
PNEUMATIC-TEST-MODULE-Insert LINKAGE Assembly 6-42
PNEUMATIC-TEST-MODULE-Insert AIR-RESERVOIR-SUPPORT 6-44
PNEUMATIC-TEST-MODULE-Component Pattern 6-47
PNEUMATIC-TEST-MODULE-Linear Component Pattern 6-48
PNEUMATIC-TEST-MODULE-Insert FRONT-SUPPORT 6-50
PNEUMATIC-TEST-MODULE-Mirrored Component 6-53
PNEUMATIC-TEST-MODULE-MIRRORFRONT-SUPPORT 6-55
Component Properties 6-56
PNEUMATIC-TEST-MODULE-Insert WHEEL-AND-AXLE 6-56
PNEUMATIC-TEST-MODULE-Remove Rigid State 6-58
PNEUMATIC-TEST-MODULE-Review AirCylinder Configmations 6-59
1-11Introduction SOLIDWORKS8 2020 Tutorial
Final ROBOT Assembly 6-64
Create the Robot Assembly 6-65
Insert the PNEUMATIC-TEST-MODULE Assembly 6-65
Insert the basicintegration Assembly 6-67
Chapter Summary 6-68
Questions 6-69
Exercises 6-71
Chapter 7 - CSWA Introduction and Drafting Competencies 7-1
Introduction 7-1
Objectives 7-6
Procedure to Create a Named Drawing view 7-7
Tutorial: Drawing Named Procedure 7-1 7-8
Tutorial: Drawing Named Procedure 7-2 7-8
Tutorial: Drawing Named Procedure 7-3 7-8
Tutorial: Drawing Named Procedure 7-4 7-9
Tutorial: Drawing Named Procedme 7-5 7-9
Tutorial: Drawing Named Procedme 7-6 7-10
Tutorial: Drawing Named Procedme 7-7 7-10
Tutorial: Drawing Named Procedme 7-8 7-10
Questions 7-12
Chapter 8 - CSWA Basic and Intermediate Part Creation and
Modification 8-1
Objectives 8-1
Read and Understand an Engineering Document 8-2
Build a Basic Par t from a Detailed Illustration 8-4
Tutorial: Vohune/Center of Mass 8-1 8-4
Tutorial: Vohune/Center of Mass 8-2 8-5
Tutorial: Mass-Volume 8-3 8-8
Tutorial: Mass-Volume 8-4 8-9
Tutorial: Mass-Volume 8-5 8-11
Build additional Basic Par ts 8-15
Tutorial: Mass-Volume 8-6 8-15
Tutorial: Mass-Volume 8-7 8-17
Tutorial: Basic/Intermediate-Part 8-1 8-19
Tutorial: Basic/Intermediate-Part 8-2 8-22
Stunmary 8-25
Questions 8-26
Chapter 9 - CSWA Advanced Part Creation and Modification 9-1
Objectives 9-1
Build an Advanced Part from a Detailed Illustration 9-2
Tutorial: Advanced Part 9-1 9-2
Tutorial: Advanced Part 9-2 9-7
Calculate the Center of Mass Relative to a Created Coordinate System Location 9-10
Tutorial: Coordinate Location 9-1 9-10
Tutorial: Coordinate Location 9-2 9-12
Tutorial: Advanced Part 9-3 9-13
Tutorial: Advanced Part 9-3A 9-17
Tutorial: Advanced Part 9-3B 9-18
1-12SOLIDWORKS Tutorial Introduction
Tutorial: Advanced Part 9-4 9-20
Tutorial: Advanced Part 9-4A 9-26
Summary 9-27
Questions 9-28
Chapter 10 - CSWA - Assembly Creation and Modification 10-1
Objectives 10-1
Assembly Modeling 10-2
Build an Assembly from a Detailed Dimensioned Illustration 10-3
Tutorial: Assembly Modeling 10-1 10-5
Tutorial: Assembly Modeling 10-2 10-11
Tutorial: Assembly Modeling 10-3 10-16
Summary 10-21
Questions 10-22
Chapter 11 - Additive Manufacturing - 3D Printing 11-1
Chapter Objective 11-3
Additive vs. Subtractive Manufacturing 11-4
3D Printer Technology 11-5
Fused Filament Fabrication (FFF) 11-5
StereoLithography (SLA) 11-8
Selective Laser Sintering (SLS) 11-10
Select the Correct Filament Material for FFF 11-11
PLA (Polylactic Acid) 11-12
Flex/SoftPLA 11-12
PLA Storage 11-13
PLA Part Accuracy 11-13
ABS (Acrylonitrile-Butadiene-Styrene) 11-13
ABS Storage 11-14
ABS Part Acctuacy 11-14
Nylon 11-15
Nylon 618 11-15
Nylon 645 11-15
Nylon Storage 11-16
Nylon Acctuacy 11-16
PVA (Polyvinyl Alcohol) 11-16
STereoLithography (*.stl) file 11-17
Save an STL (*stl) file 11-17
Additive Manufacturing (*amf) file 11-18
Save an Additive Manufactming (*amf) file 11-18
3D Manufacturing Format (*.3mf) file 11-19
Save a 3D Manufacturing Format (*.3mf) file 11-19
What is a Slicer? 11-20
How does a Slicer Work? 11-20
Slicer Parameters 11-20
Layer Height 11-20
Shell (Wall) Thickness 11-21
Infill Density/Overlap 11-21
Infill Patterns 11-21
Print Speed 11-22
Support Types 11-22
1-13Introduction SOLIDWORKS8 2020 Tutorial
Touching Buildplate 11-22
Everywhere 11-23
Bed Platform Adhesion 11-23
Raft 11-23
Skirt 11-23
Brim 11-23
Part Orientation 11-24
Example 1 11-24
Example 2 11-25
Optimize Print Direction 11-25
Thin Region 11-25
Area of Overhang 11-25
Amount of needed Support 11-25
Remove Model from the Build Plate 11-27
Non-heated Build Plate 11-27
Heated Build Plate 11-27
Know the Printer’s Limitations 11-28
Tolerance for Interlocking Parts 11-28
General Printing Tips 11-28
Reduce Infill/Overlap 11-28
Control Build Aiea Temperature 11-29
Add Pads 11-30
Safe Zone Rule 11-30
First Layer Not Sticking 11-30
Level Build Platform 11-31
Minimize Internal Support 11-31
Design a Water Tight Mesh 11-31
Clearance 11-31
In General 11-32
Print Directly from SOLIDWORKS 11-33
Add-in 11-33
SOLIDWORKS Additive Manufacturing Certification (CSWA-AM) 11-34
Summary 11-35
Appendix A-l
SOLIDWORKS Keyboard Shortcuts A-l
Modeling - Best Practices A-3
Helpfill On-Line Information A-5
SOLIDWORKS Document Types A-6
CSWA Homework Answers A-7
Glossary’
Index
G1
1-1
1-14SOLIDWORKS8 2020 Tutorial Index
Index
3 Point Arc Sketch tool, 5-17
3D ContentCentral, 1-30
3D Printing, 11-1
3D Sketch Placement Method, 3-81, 3-82
3D Sketch, 3-81, 3-82
3HOLE-SHAFTCOLLAR Assembly - Insert
SHAFT-COLLAR, 6-12
3HOLE-SHAFTCOLLAR Assembly, 6-9
4 Bar Linkage Assembly, 2-58
5HOLE-SHAFTCOLLAR Assembly, 6-13
AA
(ANSI) Landscape, 4-7
A-ANSI-MM, 4-18, 4-19
Accelerator Keys, 1-28
Add Drawing Sheet, 4-50, 4-51
Add-In Command, 1-22, 1-23, 1-24
Additive Manufacturing, 11-1
Advanced Hole Feature, 5-63
Advanced Mate, 2-33
Angle Mate, 2-33, 3-75
Distance Mate, 2-33
Limit Mate, 2-33, 3-73
Linear/Linear Coupler Mate, 2-33
Path Mate, 2-33
Symmetric Mate, 2-33, 3-76
Width Mate, 2-33
Advanced Mode, 1-10
AirCylinder Assembly, 2-34
Aligned Dimension, 3-38
Alignment Mate Option, 2-32
Angle Mate, 2-35, 3-75
ANGLE-13HOLE Part, 3-15
Boss-Extrude1 Feature, 3-19
Fillet Feature, 3-23
First Extruded Cut Feature, 3-20
First Linear Pattern Feature, 3-22
Second Extruded Cut Feature, 3-24
Second Linear Pattern Feature, 3-25
Third Extruded Cut Feature, 3-26
Annotation tab, 4-8
Annotation toolbar, 4-8
ANSI Drafting Standard, 2-7, 3-14, 3-47, 4-9
Appearance, 1-21, 1-29, 2-14
Appearances, Scenes and Decals, 1-32, 2-14
Apply Scene tool, 1-21
Arc Condition, 5-19
Center, 5-19
Max, 5-19
Min, 5-19
Arrow Leader Direction, 5-7
Arrow Size, 4-10
ASME Y14.3M, 3-6, 3-8
Assembly CommandManager, 1-24
Assembly tab, 1-24
Evaluate tab, 1-24
Layout tab, 1-24
Sketch tab, 1-24
SOLIDWORKS Add-in tab, 1-24
Assembly References, 2-35
Assembly tool - Insert Component, 2-38
Assembly tool - Mate, 2-39
Auto Balloons Drawing tool, 4-49
Axis PropertyManager, 5-37
Axis tool, 5-37
AXLE Part, 2-10
Appearance, 2-14
Base Sketch, 2-10
Edit Color, 2-14
Extruded Base Feature, 2-10
Save As, 2-13
View Modes, 2-15
AXLE-3000 Part, 5-45
B
Base Feature, 2-12
Base Sketch, 2-11
Bill of Materials PropertyManager, 4-47
Bill of Materials tool, 4-47
Binder Clip Assembly, 3-72
Blind End Condition, 3-13, 3-36, 3-79
BOM, 4-47
Boss-Extrude PropertyManager, 2-12
Boss-Extrude1 Feature, 3-11, 3-13, 3-19
C
Cam Mate, 2-33, 3-86
Center Rectangle Sketch tool, 5-9, 5-10
index - 1Index SOLIDWORKS Tutorial
Center of Mass Point, 4-65
Centerline Sketch tool, 3-26, 3-34
Centerpoint Arc Sketch tool, 5-16
Centerpoint Straight Slot Sketch tool, 2-24
Chamfer Feature, 3-54
Circle PropertyManager, 2-10
Circle Sketch tool, 2-12, 3-11, 3-37
Circular Pattern Feature, 3-44, 3-53, 5-37
Circular Pattern PropertyManager, 5-36
Coincident Mate, 2-32, 2-37
Coincident Relation, 3-14, 3-40
Coincident SmartMate, 3-64
Collinear Relation, 5-29
Collision Detection, 3-90
CommandManager, 1-22
CommandManager - Assembly, 1-24
Assembly tab, 1-24
Evaluate tab, 1-24
Layout tab, 1-24
Sketch tab, 1-24
SOLIDWORKS Add-in tab, 1-24
CommandManager - Dock/Float, 1-25
CommandManager - Drawing, 1-23
Annotation tab, 1-23
Evaluate tab, 1-23
Sketch tab, 1-23
SOLIDWORKS Add-in tab, 1-23
View Layout tab, 1-23
CommandManager - Float, 1-25
CommandManager - Part, 1-22
DimXpert tab, 1-22
Evaluate tab, 1-22
Features tab, 1-22
Sketch tab, 1-22
SOLIDWORKS Add-in, 1-22
Company Logo, 4-15
Component Patterns in the Assembly, 6-46
Component Properties, 6-56
Concentric/Coincident SmartMate, 3-64
Concentric Mate, 2-32, 2-36
Concentric Relation, 3-28
ConfigurationManager, 4-36, 4-43
ConfigurationManager tab, 1-27, 1-28
Confirmation Corner, 1-19
Consolidated Slot toolbar, 3-27
Constant Radius Fillet Type, 3-23
Construction Line, 5-3, 5-33
Convert Entities Sketch tool, 3-51
Copy a Drawing View, 4-58
Corner Rectangle Sketch tool, 3-39
Cosmetic Thread, 3-14, 3-80
Counter Weight Assembly, 3-84
CSWA Exam, 7-1
Advanced Part and Modification, 9-1
Assembly and Modification, 10-1
Basic Part and Intermediate Part, 8-1
Introduction, 7-1
Custom Properties, 4-11, 4-36
Customize CommandManager, 1-23
Cut-Revolve PropertyManager, 5-30
D
Default Datum Planes, 3-5
Default Reference Planes, 1-12
Front Plane, 1-12
Right Plane, 1-12
Top Plane, 1-12
Define Drawing Material Property, 4-36
Define Drawing Property, 4-36
Design Library, 1-30
3D ContentCentral, 1-30
Toolbox, 1-30
Design Table, 4-54, 4-64
Detail Drawing, 4-27
Detail View Drawing tool, 4-53
Diameter Dimension, 3-21, 3-49
Dimension Cursor icon, 1-18
Dimension Feedback icon, 1-18
Dimension Font, 4-10
Dimension Precision, 4-31
DimXpertManager tab, 1-26, 1-28
Display Style, 1-20, 2-16
Hidden Lines Removed, 1-20, 2-17
Hidden Lines Visible, 1-20, 2-17
Shaded With Edges, 1-20, 2-16
Shaded, 1-20, 2-16
Wireframe, 1-20, 2-17
DisplayManager tab, 1-26
Distance/Limit Mate, 2-33
Distance Mate, 2-32
Dock CommandManager, 1-25
Document Dialog box, 2-7
Document Properties, 2-9, 2-19, 3-10
Document Properties - ANSI, 2-7, 2-19
Document Properties - Decimal Place, 2-20
Document Properties - IPS, 2-9, 2-19
Document Properties - Units, 2-9, 2-19
Dome Feature, 5-20
Dome PropertyManager, 5-20
Double-click, 1-35
index - 2SOLIDWORKS8 2020 Tutorial Index
Drawl, 4-8
Drawing - Leader arrow direction, 5-7
Drawing CommandManager, 1-23
Annotation tab, 1-23
Evaluate tab, 1-23
Sketch tab, 1-23
SOLIDWORKS Add-in tab, 1-23
View Layout tab, 1-23
Drawing Custom Property, 4-12
Drawing Dimension Text, 4-31
Drawing Document Properties, 4-9
Drawing Radius Text, 4-34
Drawing Template, 4-5
Drawing View Component Properties, 4-25
Drawing View Edge Properties, 4-25
Drawing View Properties, 4-25
Drop-down Menu, 1-9
Dual Dimensions display, 4-10
Dynamic Mirror Sketch tool, 3-27, 3-34
E
Edge Cursor icon, 1-18
Edge Feedback icon, 1-18
Edit Appearance tool, 2-14
Edit Command, 3-13, 3-23, 5-40
Edit Design Table, 4-56
Edit Feature, 3-23, 5-40, 6-10
Edit Sheet Format Mode, 4-5
Edit Sheet Mode, 4-5
Edit Sketch, 3-13, 3-50
End Chain, 3-34
End Condition - Blind, 2-12, 3-36
End Condition - Mid Plane, 2-12, 3-52
End Condition - Through All, 2-23, 3-21
Equal Relation, 3-18, 3-28, 3-38, 3-40
Exit Sketch tool, 5-11
Explicit Equation Driven tool, 5-59
Exploded View tool, 4-43
Extruded Base Feature, 2-12, 2-21
Extruded Boss/Base Feature, 2-10, 2-20
Extruded Cut Feature, 2-22, 3-20
Extruded Cut PropertyManager, 2-23
Extruded Thin Feature, 3-16, 3-18
FF
Key, 2-11
Face Feedback icon, 1-18
FeatureManager, 1-26, 1-27
Customize,1-24
Rollback bar, 1-13
Split, 1-27
FeatureManager Design Tree, 1-26
ConfigurationManager tab, 1-26
DimXpertManager tab, 1-26
DisplayManager tab, 1-26
PropertyManager tab, 1-26
FeatureManager tab, 1-26
File Command, 1-8
File Explorer, 1-30
Fillet Feature, 3-23
Fillet PropertyManager, 3-23
FilletXpert tab, 3-23
Manual tab, 3-23
FilletXpert tab, 3-23
Filter icon, 5-12
Filter, 1-27
First Angle Projection, 3-7, 3-8
Fixed Component, 3-57
FLATBAR Drawing, 4-20
Front, Top, Right View, 4-21
Insert Annotations, 4-29
Insert Dimension, 4-29
Isometric View, 4-22
Linked Note, 4-37
Position View, 4-26
Sheet2, 4-58
FLATBAR Part, 2-24
Base Sketch, 2-26
Design Table, 4-54
Extruded Base Feature, 2-28
Extruded Cut Feature, 2-29
Linear Pattern Feature, 2-30
Save, 2-31
FLATBAR Sub-Assembly, 6-9
FLATBAR-SHAFTCOLLAR Assembly, 4-60
Insert First SHAFTCOLLAR, 4-61
Insert FLATBAR, 4-64
Insert Second SHAFTCOLLAR, 4-62
Flexible State, 6-58, 6-59, 6-60
Float CommandManager, 1-25
Float Component, 3-57
Fly-out FeatureManager, 1-28
For Construction, 5-31, 5-34
Formatting Dialog box, 4-12
FRONT-SUPPORT Assembly, 3-56
Insert ANGLE-13HOLE, 3-56
Insert First HEX-STANDOFF, 3-58
Insert First SCREW, 3-64
Insert Fourth SCREW, 3-65
Insert Second HEX-STANDOFF, 3-60
INDEX - 3Index SOLIDWORKS Tutorial
Insert Second SCREW, 3-65
Insert Third SCREW, 3-65
Insert TRIANGLE, 3-61
Front View, 1-16
G
Gear Mate, 2-33, 3-77, 3-85
Gem Binder Clip Assembly, 3-72
Geometric Relation - Coincident, 3-14, 3-40
Geometric Relation - Collinear, 5-29
Geometric Relation - Concentric, 3-28
Geometric Relation - Equal, 3-18, 3-28, 3-38
Geometric Relation - Horizontal, 3-12, 3-28
Geometric Relation - Make Equal, 3-18
Geometric Relation - Make Horizontal, 3-12
Geometric Relation - Parallel, 3-59
Geometric Relation - Tangent, 3-29, 3-40
Geometric Relation - Vertical, 5-17
Geometry Pattern, 3-41
Geometry Pattern Option, 2-30
Graphics Window, 1-11
H
Heads-up View toolbar, 1-15, 1-19
3D Drawing View, 1-21, 1-34
Apply Scene, 1-21
Display Style, 1-20
Edit Appearance, 1-21
Hide/Show Items, 1-21, 1-27
Previous View, 1-19
Rotate, 1-15, 1-21
Section View, 1-20
View Orientation, 1-20
View Settings, 1-21
Zoom to Area, 1-15, 1-19
Zoom to Fit, 1-15, 1-19
Helix/Spiral Feature, 5-57
Help Command, 1-16
HEX-STANDOFF Part, 3-10
Base Feature, 3-13
Hole Wizard Feature, 3-14
Hidden Lines Removed, 1-20
Hide Components, 6-50
Hide Drawing Dimensions, 4-32
Hide Drawing View, 4-32
Hide Origin, 4-23
Hide Sketch, 3-44
Hide/Show Items tool, 1-21
Hinge Mate, 2-33
Hole Specification PropertyManager, 3-14
Hole Wizard Feature, 3-14, 3-82
HOOK Part, 5-14
Dome Feature, 5-20
Swept Base Feature, 5-20
Thread Feature, 5-21
Horizontal Relation, 3-12, 3-28, 5-18
l-J -K
Insert a Plane, 5-8
Insert Axis, 5-37
Insert Component Assembly tool, 2-36
Insert Component, 3-61
Insert Magnet Line, 4-49
lnstant3D Feature, 5-13
IPS - (inch, pound, second), 2-11, 3-17
Isometric View, 1-20
L
Leader Arrow Direction, 5-7
Lightweight State, 2-57
Limit Mate, 2-33, 3-73
Line Sketch tool, 3-18, 5-17
Linear Component Pattern, 6-48
Linear Pattern Feature, 2-30, 3-22, 3-25
Linear Pattern Feature, Instances, 3-22, 3-26
Linear Pattern Feature, Spacing, 3-22, 3-26
Linear Pattern PropertyManager, 2-30
Linear/Linear Coupler Mate, 2-33
Link Notes, 4-35
Link to Property tool, 4-38
LINKAGE Assembly, 2-31, 2-34, 2-35
Basic Motion, 2-44
Insert AirCylinder, 2-34
Insert AXLE, 2-36
Insert First FLATBAR, 2-38
Insert First HEX-STANDOFF, 6-34
Insert First SHAFT-COLLAR, 2-41
Insert Fourth SHAFT-COLLAR, 6-40
Insert Second AXLE, 6-37
Insert Second SHAFT-COLLAR, 2-42
Insert Second FLATBAR, 2-39
Insert Second HEX-STANDOFF, 6-36
Insert Third SHAFT-COLLAR, 6-39
LINKAGE Assembly Drawing, 4-40
Animation, 4-46
Automatic Balloons, 4-49
Bill of Materials, 4-47
Insert Magnetic Line, 4-49
Sheetl, 4-40
Sheet2, 4-50
INDEX -4SOLIDWORKS8 2020 Tutorial Index
Sheet2 - Detail View, 4-52
Sheet2 - Section View, 4-52
Linked Note, 4-37
Lock Mate, 2-32
Lofted Boss/Base Feature, 5-12
Lofted Feature, 5-12
Logo, 4-15
LPattem Feature, 3-22, 3-24
M
Make Assembly from Part/Assembly, 4-24
Make Drawing from Part/Assembly, 4-24
Make Equal Relation, 3-18
Make Horizontal Relation, 3-12
Mate Error, 6-14
Mate tool, 3-58
Mate Types, 2-32
Max Arc Condition, 5-19
Measure tool, 6-23
Mechanical Mates, 2-33
Cam Mate, 2-33, 3-86
Gear Mate, 2-33, 3-77
Hinge Mate, 2-33, 3-89
Rack Pinion Mate, 2-33, 3-88
Screw Mate, 2-34, 3-74
Slot Mate, 2-33, 3-78
Universal Joint Mate, 2-34
Menu Bar Menu, 1-8
Edit, 1-8
File, 1-8
Help, 1-8
Insert, 1-8
Pin, 1-8
Tools, 1-8
View, 1-8
Menu Bar Toolbar, 1-8
File Properties, 1-8
New Document, 1-8
Open Document, 1-8
Options, 1-8
Print Document, 1-8
Rebuild Document, 1-8
Save Document, 1-8
Select Sketch Entities, 1-8
Undo Last Action, 1-8
Mid Plane - End Condition, 2-12, 3-52
Mirror Components Assembly tool, 6-53
Mirror Components PropertyManager, 6-53
Mirror Feature, 3-41
MMGS - (millimeter, gram, second), 2-9
Model Items tool, 4-29
Model View PropertyManager, 4-7, 4-21
Model View tool, 4-51
Modify Feature, 4-33
Modify Part, 5-39
Modify Arc Condition, 5-19
Modify Dimensions, 3-20, 5-39
Modify Drawing Dimension Text, 4-31
Modify Drawing Radius Text, 4-34
Motion Study tab, 1-33
MotionManager, 1-33
Animation tab, 1-33
Basic Motion tab, 1-33
Mouse Gestures, 1-24
Mouse Pointer, 1-18
Move Drawing View, 4-24
Move with Triad, 6-19, 6-21
Multiple Drawing View, 4-21
N
New Assembly Document, 3-56, 3-57, 6-9
New Document, 2-6, 3-10, 3-17
New Drawing Document, 4-7, 4-19, 4-21
New Drawing, 4-7, 4-19, 4-21
New Part Document, 1-9, 2-7, 3-10, 3-17
New Part, 2-6, 3-10, 3-17, 3-33, 5-7
New Sketch, 3-11
Note tool, 4-31
Novice Mode, 2-6
O
Offset Entities Sketch tool, 3-35
Offset Sketch, 3-35
OnSurface Sketch Relation, 3-81
Open Document, 1-8
Options, 1-8, 1-10
Origin, 1-11
Orthographic Projection, 3-5, 3-6, 3-7
P-Q
Pack and Go tool, 2-35
Parallel Mate, 3-59, 3-61, 3-63
Parallel Relation, 3-28
Parallelogram Sketch tool, 3-42
Parametric Notes, 4-31
Part CommandManager, 1-22
DimXpert tab, 1-26
Evaluate tab, 1-22
Features tab, 1-22
Sketch tab, 1-22
index - 5Index SOLIDWORKS Tutorial
SOLIDWORKS Add-in tab, 1-22
Part Template, 5-7
PART-ANSI-IN, 5-7
Paste a Drawing View, 4-58
Pattern Direction Box, 3-25
Pattern Driven Component Pattern tool, 6-47
Perpendicular Mate, 2-32
Pin Option, 1-8
Plane Feature, 5-9
Plane PropertyManager, 5-9
Pneumatic Test Module Layout, 6-7
PNEUMATIC-TEST-MODULE, 6-7, 6-32
Component Pattern Assembly tool, 6-46
Insert AIR-RESERVOIR-SUPPORT, 6-44
Insert FLAT-PLATE, 6-33
Insert FRONT-SUPPORT Assembly, 6-50
Insert HEX-STANDOFF Part, 6-34
Insert LINKAGE Assembly, 6-42
Insert WHEEL-AND-AXLE Assembly, 6-56
Linear Component Pattern tool, 6-48
Mirror Components tool, 6-52, 6-53
MirrorFRONT-SUPPORT, 6-55
Point Sketch tool, 3-14
Polygon Sketch tool, 3-11, 5-26
Primary Datum Plane, 3-5
Primary Units, 2-9
Print Document, 1-8
Properties of a Drawing Sheet, 4-24
PropertyManager tab, 1-26
R
Rack Pinion Mate, 2-33, 3-88
Rebuild Command, 2-23, 4-41
Recover from a Mate Error, 6-13, 6-14
Reference Axis, 5-37
Reference Planes, 3-5
Rename Feature, 2-46
Rename Sketch, 2-46
Reorder Features, 5-44
Replace Components tool, 6-13
Replace PropertyManager, 6-13
Revolved Base Feature tool, 3-49
Revolved Cut Feature, 5-30
Ridge State, 6-58
Right-click, 1-18, 1-35
Right-click End Chain, 3-34
Right-click Select, 3-14, 3-18
Right View, 1-16
ROBOT Assembly, 6-64
Insert basic_integration, 6-64, 6-67
Insert HEX-STANDOFF, 6-34, 6-66
Insert PNEUMATIC-TEST-MODULE, 6-65
Insert Robot-Platform, 6-65
Rollback Bar, 1-13
Rotate Model, 1-15
S
Save, 1-8, 2-13
Save an Assembly, 2-46
Save As, 2-13,3-11,5-39
Save as Copy and Continue, 5-39, 6-13
Save As Drawing Template, 4-18
Save Command, 1-8, 2-13, 5-39
Save Document, 1-8, 2-13
Save Drawing Template, 4-17, 4-18
Save Part Template, 5-7
Save Sheet Format, 4-17, 4-18
Screw Mate, 2-34, 3-74
SCREW Part, 3-45
Chamfer Feature, 3-54
Circular Pattern Feature, 3-53
Extruded Cut Feature, 3-51
Fillet Feature, 3-53
Revolved Base Feature, 3-47
Secondary Datum Plane, 3-5
Section View Drawing tool, 4-52
Section View PropertyManager, 4-52
Section View, 5-44
Selection Filter toolbar, 5-12
SHAFT-COLLAR Part, 2-18
Appearance, 2-23
Base Sketch, 2-21
Boss-Extrude Feature, 2-21
Edit Color, 2-23
Extruded Base Feature, 2-21
Extruded Cut Feature, 2-21
Modify Dimension, 2-23
Save As, 2-19
SHAFTCOLLAR-500 Part, 5-46
Sheet Format, 4-5
Sheet Format/Size Dialog box, 4-7
Sheet Properties, 4-9, 4-23, 4-25
Sheet Scale, 4-9
Sheetl, 4-8
Show, 3-37, 5-8, 5-31
Sketch Fillet Sketch tool, 3-36
Sketch Plane, 1-12, 2-10, 3-5, 3-11
Sketch Point tool, 3-14
Sketch Status, 2-14
Fully Defined, 2-14
index - 6SOLIDWORKS8 2020 Tutorial Index
Over Defined, 2-14
Under Defined, 2-14
Sketch tools, 2-10
3 Point Arc, 5-18
Center Rectangle, 5-9, 5-10
Centerline, 3-26, 3-34, 3-37, 3-47, 5-32
Centerpoint Arc, 5-16
Centerpoint Straight Slot, 2-26
Circle, 2-22, 3-20, 3-37
Convert Entities, 3-51
Corner Rectangle, 3-39, 5-12
Line, 3-18, 3-52
Offset Entities, 3-35
Parallelogram, 3-42
Point, 3-14
Polygon, 3-11, 5-26
Sketch Fillet, 3-36
Smart Dimension, 2-11, 3-35
Straight Slot, 3-27, 3-42
Tangent Arc, 3-40, 3-50
Trim Entities, 3-39, 3-50
Slot Mate, 2-33, 3-78
Slot PropertyManager, 3-27
Smart Dimension Sketch tool, 2-11
SmartMate, 3-63, 6-12
SOLIDWORKS Graphics Window, 1-11
CommandManager, 1-11
FeatureManager, 1-11
Heads-up View Toolbar, 1-11
Origin, 1-11
Task Pane, 1-11
SOLIDWORKS Help, 1-16
SOLIDWORKS Resources, 1-29
SOLIDWORKS Tutorials, 1-17
SOLIDWORKS User Interface, 1-7, 1-11, 1-
15
CommandManager, 1-22
Confirmation Corner, 1-19
Drop-down menu, 1-9
FeatureManager Design Tree, 1-26
Fly-out FeatureManager, 1-28
Heads-up View toolbar, 1,15, 1-19
Menu Bar Menu, 1-8
Menu Bar Toolbar, 1-8
Motion Study tab, 2-47
Right-click Pop-up menu, 1-18
System feedback icons, 1-18
Tags, 1-27
Task Pane, 1-29
Split ConfigurationManager, 1-27
Split FeatureManager, 1-27
Split Line Feature, 5-63
Standard Mates, 2-32
Alignment, 2-32
Angle Mate, 2-32
Coincident Mate, 2-32
Concentric Mate, 2-32
Distance Mate, 2-32
Lock Mate, 2-32
Parallel Mate, 2-32, 6-30, 6-35
Perpendicular Mate, 2-32
Tangent Mate, 2-32
Standard Sheet Size, 4-7
Standard Views Toolbar, 1-19
Start a SOLIDWORKS Session, 1-4
Start Screen, 1-4
Straight Slot Sketch tool, 2-26, 3-27
Suppress Feature, 3-54
Suppress, 3-54
Swept Base Feature, 5-14, 5-15, 5-20
Swept Boss/Base Feature, 5-20
Swept Path, 5-14
Swept Profile, 5-14
Symbol Dialog Box, 4-14
Symmetric Mate, 2-33, 3-76
Symmetry, 3-22, 8-10
System Feedback icon, 1-18
Dimension, 1-18
Edge, 1-18
Face, 1-18
Vertex, 1-18
System Options - File Locations, 4-18
T
Tangent Arc Sketch tool, 3-32, 3-40
Tangent Edges Removed, 4-42
Tangent Edges Visible, 4-42
Tangent Edges with Font, 4-42
Tangent Mate, 2-32
Tangent Relation, 3-29, 3-40
Task Pane, 1-29
Appearances, Scenes and Decals, 1-32
Custom Properties, 1-32
Design Library, 1-30
File Explorer, 1-30
SOLIDWORKS Resources, 1-29
View Palette, 1-31
Templates - Default, 2-7
Templates tab, 2-7
Temporary Axis, 3-43, 3-53, 5-36
Tertiary Datum Plane, 3-5
index - 7Index SOLIDWORKS Tutorial
Text Format Box, 4-14, 4-38
Third Angle Projection, 3-7, 3-8, 4-6
Thread Feature, 5-21, 5-23
Thread Profile, 5-23
Through All End Condition, 2-23, 3-25
Tile Horizontally, 3-64
Title Block, 4-10
Tolerance Block, 4-13
Tolerance/Precision Box, 4-13
Toolbars, 1-8
Top View, 1-16
Trailing Zeroes, 4-30
TRIANGLE Part, 3-31
Boss-Extrude Feature, 3-36
Circular Pattern Feature, 3-44
First Extruded Cut Feature, 3-37
Mirror Feature, 3-41
Second Extruded Cut Feature, 3-39
Third Extruded Cut Feature, 3-42
Trim Entities Sketch tool, 3-39
Trim Lines, 3-39
Trim to Closest, 3-39, 3-50
Trimetric View, 1-16
Tutorial tab, 2-7
Type of Projection, 4-9
U
Under Defined Sketch, 2-17
Undo Document, 2-23
Undo Last Action, 2-23
Undo tool, 2-23
Units, 2-9, 2-11,2-19, 3-10
Units - Dual Dimensions Display, 4-10
Units - Primary, 2-9
Units - Secondary, 2-9
Universal Joint Mate, 2-34
User Specified Name, 4-36, 4-48
V
Vertex Cursor icon, 1-18
Vertex Feedback icon, 1-18
Vertical Relation, 5-17, 5-29
View Axis, 6-26
View Layout tab, 4-8
View Layout toolbar, 4-8
View Modes, 1-16, 1-20
Front, 1-16, 1-20
Isometric, 1-20
Right, 1-16, 1-20
Top, 1-16, 1-20
View Orientation tool, 1-21
View Origin, 2-8, 2-15
View Palette tab, 1-31, 4-22
View Reference Axis, 5-37
View Sketch Relations, 2-27
View Temporary Axes, 3-44, 3-53
View Toolbars, 1-4, 1-15, 1-16
W
Wake up, 2-28
WEIGHT Part, 5-6
Extruded Cut Feature, 5-13
lnstant3D Feature, 5-13
Lofted Feature, 5-12
WEIGHT-HOOK Assembly, 3-70
WEIGHT-LINK Assembly, 3-71
What’s Wrong Dialog box, 6-14
WHEEL Part, 5-24
Boss-Extrude Feature, 5-27
Circular Pattern Feature, 5-36
First Extruded Cut Feature, 5-31
Revolved Cut Feature, 5-30
Second Extruded Cut Feature, 5-33
WHEEL-AND-AXLE Assembly, 6-25
Insert AXLE-3000 Part, 6-25
Insert HEX-ADAPTER Part. 6-28
Insert SHAFTCOLLAR-500 Part, 6-30
WHEEL-FLATBAR Assembly, 6-16
Insert 3HOLE-SHAFTCOLLAR, 6-19
Insert 5HOLE-SHAFTCOLLAR, 6-21
Insert WHEEL, 6-17
Width Mate, 2-33
Windows Command, 1-8
Window-Select Command, 1-15
Wireframe, 1-20, 3-27
X-Y-Z
Zoom In, 1-15
Zoom Out, 1-15
Zoom to Area, 1-15, 1-19
Zoom to Fit, 1-15, 1-19
index - 8

Solidworks, Tutorial, سولدورك, سولدوركس, سولدوورك, سولدووركس, سوليدورك, سوليدوركس, سوليدوورك, سوليدووركس,

كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net
أتمنى أن تستفيدوا من محتوى الموضوع وأن ينال إعجابكم

رابط من موقع عالم الكتب لتنزيل كتاب SOLIDWORKS Tutorial - A Step-by-Step Project Based Approach
رابط مباشر لتنزيل كتاب SOLIDWORKS Tutorial - A Step-by-Step Project Based Approach
الرجوع الى أعلى الصفحة اذهب الى الأسفل
 
كتاب SOLIDWORKS Tutorial - A Step-by-Step Project Based Approach
الرجوع الى أعلى الصفحة 
صفحة 2 من اصل 1
 مواضيع مماثلة
-
» كتاب SOLIDWORKS 2023 Tutorial - A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling
» كتاب SOLIDWORKS 2024 A Step-By-Step Tutorial Guide for Beginners
» كتاب Engineering Graphics with SOLIDWORKS - A Step-by-Step Project Based Approach
» كتاب Engineering Graphics with SOLIDWORKS - A Step-by-Step Project Based Approach
» كتاب Drawing and Detailing with SOLIDWORKS 2022 - A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
منتدى هندسة الإنتاج والتصميم الميكانيكى :: المنتديات الهندسية :: منتدى شروحات البرامج الهندسية-
انتقل الى: