Admin
مدير المنتدى
عدد المساهمات : 18753
التقييم : 34787
تاريخ التسجيل : 01/07/2009
الدولة : مصر
العمل : مدير منتدى هندسة الإنتاج والتصميم الميكانيكى
 |  موضوع: كتاب Proceedings of the Sixteenth International Machine Tool Design and Research Conference الخميس 29 ديسمبر 2022, 7:36 pm | |
| 
أخواني في الله
أحضرت لكم كتاب
Proceedings of the Sixteenth International Machine Tool Design and Research Conference
Edited by
F. Koenigsberger
Professor of Machine Tool Engineering
University of Manchester Institute ofScience and Technology
and
S. A. Toblas
Chance Professor and Head of Department
Department of Mechanical Engineering
University of Birmingham
و المحتوى كما يلي :
CONTENTS
OPENING SESSION
Opening Address. H. O. BARRETT
MANUFACTURING SYSTEMS
Page
The role of design in the introduction of a new machine too1. B. J. DAVIES 7
Long-range trends in the automation of machine tools and manufacturing. M. EUGENE
MERCHANT 13
Today's DNC in Japan. SEIUEMON INABA and HAJIMU INABA 21
Processing of workpiece information for producing engineering drawings. G. SPUR and
J. GAUSEMEIER 29
DNC systems in the electrical industry-examples of applications at Siemens AG.
B. GUTT and E. JUNGMANN 35
Analysis of a direct numerical control system by means of real-time process simulation.
M. WECK and A. SCHÜRING 41
The contribution of quality assurance to efficient production. L. SMITH 49
The optimum sequence of operations in the multistage manufacturing system. TATESHI
KlSHINAMI and KATSUMASA SAlTO 57
Computerised archives and library system designed especially for manufacturing data.
E. J. FEICHT 63
The use of a computer in a manufacturing system. M. Y. MALIK 67
Aspects of the control of manufacture in a small diecasting company. G. BEAUMONT
and R. H. THORNLEY 71
Design and automatie set-up of drawings and work plans. W. EVERSHEIM and W.
WIEWELHOVE 75
The design and implementation of an integrated computer production control system in a
medium-sized engineering company. J. MALCOLM 81
The design of standard cells for group technology by the use of machine tool and
workpiece statistics. MANSOOR HUSAIN and R. LEONARD 87
Layout design and simulation of group cells. ALLAN S. CARRIE and J. MANNION 99
NUMERICAL CONTROL
Improvement of adaptive control of milling machine by non-contact cutting force
detector. KOJI NAKAZAWA 109
Adaptive control system for variable gain in ACC systems. G. STUTE and F. R. GOETZ 117
New automatie control system of NC machine tool for high working accuracy. M.
MASUKO, N. NISHIWAKI, Y. KEMBO and B. S. SHIN 123
ProfIle accuracy of difficult-to-cut materials in computer numerical control. HlROSHI
EDA and KOZO KISHI 129
A television-controlled printed circuit board drilling machine. D. PATERSON, A. R.
TURNER-SMITH, J. A. G. HALE and P. SARAGA 137
The influence of microprocessors on the evolution of numerical control systems. R.
SAVAGE 143
NC-CNC, what prospects has CNC to offer? R. BAISCH 149
Computer graphics and numerically controlled machine tools for pattern, mould and die
production. R. B. MORRIS and D. B. WELBOURN 155
QUAUTY CONTROL AND SAFETY
In-process or post-process metrology? W. N. CLARK 163
Development of an in-process sensor for surface roughness by laser beam. KIMIYUKI
MITSUI and HISAYOSHI SATO 171
Aspects of machine tool safety in recent UK legislation. F. K. GROSZMANN 179
vvi
MACIDNE TOOL DESIGN
Computing the thermal behaviour of machine tools using the fmite element
method-possibilities and limitations. M. WECK and L. ZANGS 185
An analysis of methods used in minimising thermal deformations of machine tools. KEIJI
OKUSIDMA and YOSHIAKIKAKIN0195
Control of the thermal deformation of a machine too1. T. SATA, Y. TAKEUCID and N.
OKUBO 203
Analysis and optimisation of structural dynamics of machine tools by a synthesis of
dynamic rigidity program system. MASATAKA YOSIDMURA 209
Automatic optimisation of dynamic dampers for machine tool structures. H. VAN
BRUSSEL, J. PINTE and K. SOUDAN 217
Damping in taper roller bearings. M. ELSERMANS, M. HONGERLOOT and R. SNOEYS 223
New developments in program control applied to big turret lathes. IAN NICKOLS 229
Presentation of a programmable controller with bit and word processing. G. STUTE and
H. JETTER 235
Pneumatic stepping motors-design, control and application. H. K. TOENSHOFF and K.
RALL 241
Computer-aided design and manufacture of rolls for cold roll forming machines. A.
RHODES, T. MUNRO and A. S. BOARDMAN 251
I..arge rototraversing doughnut-type table for the machining of nuclear vessels. G.
ZUFFELLATO 261
Design procedure for flat aerostatic hearings. J. C. PADATE and S. SOMASUNDARAM 267
SPECIAL PROCESSES
Some effects of electrolyte flow rates on the electrochemical machining process. P. J.
MOIR and S. J. HARVEY 275
Electrochemical machining of curved long flowpath proftles. P. J. MOIR and S. J.
HARVEY 283
Planetary spark erosion-application and optimisation. G. N. LEVY and B. FERRONI 291
Friction welding. G. R. DICKSON and A. S. BAHRANI 299
Slide pressure welding. N. BAY, P. M. KVIST and F. RASMUSSEN 309
Reclamation processes of machining swarf by consolidation and their economic
feasibility. C. S. SHARMA and T. NAKAGAWA 313
Powder from swarf. J. M. ALEXANDER and B. LENGYEL 319
MACHINE TOOL OPERATION
A statistical approach to machine too1 testing. A. GOLDER 331
The reliability and value of tests to determine the limitations of the performance of lathes
imposed by self-excited vibration. H. BEESON and A. GOLDER 337
An investigation of the use of cutting tests to assess the performance of lathes. C.
CONSTANTINESCU, N. D. CIRTU, G. PAXINO, H. BEESON and A. GOLDER 345
A survey of the noise levels ofmetal-cutting machine tools. N. D. CIRTU, R. DIMITRIU,
D. HARTLEY and A. GOLDER 363
Determination of a performance value for machine tools with respect to noise emission
and proposals to its improvement by design. H. K. TOENSHOFF and G. ROHR 371
A study on the dynamic machining of free machining steel. R. RAMASWAMI, H. VAN
BRUSSEL and P. VANHERCK 377
GRINDING
The proper selection of grinding conditions in cylindrical plunge grinding. J. PETERS, R.
SNOEYS and A. DECNEUT 387
Grindability of tool steels from the viewpoint of surface quality. IVO KVASNICKA 395
The identification of grinding faults from the appearance of the ground surface. H.
RENKER 401
Improved technical and physical utilisation of vertical surface grinding machines by
peripheral face grinding. R. REINHOLD 407
High efficiency, high precision grinding of parallel surfaces. HANS R. VOGT 411
Safety in grinding. G. SWEENEY and A. R. THORN 421vü
METAL FORMING
The mechanics of swing forging. J. M. ALEXANDER and M. A. CHAABAN 439
A study on plastic working of alloys in their mashy state-the second report. S.
FUKUOKA, M. KIUCHI and K. ARAI 451
A new method of manufacturing wire. M. C. SHAW and T. HOSHI 459
Incremental forging of balls from cylindrical specimens and of rollers from rectangular
solids. N. R. CHITKARA, W. JOHNSON and M. UEDA 467
Lubrication for warm forming. T. A. DEAN 483
The effect of seal position on stresses and deformations in dies for semi-continuous
hydrostatic extrusion. J. M. ALEXANDER and M. E. SAID 491
A method of obtaining isothermal, constant high strain rate stress-strain data. M.
MOHITPOUR and B. LENGYEL 503
Deep-drawing of tin-plate using a telescopic punch. S. R. GURUMUKHI and P. B.
MELLOR 507
An investigation into the hole-flanging of Zn-Al superplastic sheet. G. G. W. CLEMAS,
S. T. S. AL-HASSANI and W. JOHNSON 517
Deep-drawing of square shells with rubber die. K. YAMAGUCHI, M. FUKUDA and M.
YOKOTA 527
Observations on the application of limit diagrams to aluminium alloy extrusion. T.
SHEPPARD and A. F. CASTLE 535
METAL CUTTING
Resistance of alumina tool tips to formation of comb cracks. R. M. EI-ZAHRY and D. S.
DUGDALE 547
Some experiments to compare diamond and diamond-compact turning tools. M. CASEY
and J. WILKS 553
Deformation of tungsten carbide tools when cutting Inconel 718. A. E. FOCKE, F. E.
WESTERMANN, A. ERMI, J. YAVELAK and M. HOCH 565
Continuous measuring of flank wear. TH. STÖFERLE and B. BELLMANN 573
Economic generation of tool life data using the R-T characteristic curve. M. Y.
FRIEDMAN, V. A. TIPNIS and M. FIELD 579
An analysis of crater wear based on the adhesive wear mechanism. C. RUBENSTEIN 585
Author Index 595
Subject Index 597
X
Jetter, H., 235
Johnson, W.,467, 517
Jungmann, E., 35
Kvasnicka, I., 395
Kembo, Y., 123
Kishi, K., 129
Kishinarni, T., 57
Kiuchi, M., 451
Kvist, P.M., 309
Lengyel, B., 319, 503
Leonard, R., 87
Levy, G.N., 291
Malcolm, J., 81
Malik, M.Y., 67
Mannion, J., 99
Masuko, M., 123
Mellor, P.B., 507
Mitsui, K., 171
Merchant, M.E., 13
Mohitpour, M., 503
Moir, P.J., 275,283
Morris, R.B., 155
Munro, T., 251
Nakagawa, T., 313
Nakazawa, K., 109
Nickols, I., 229
Nishiwaki, N., 123
Okushima, K., 195
Okubo, N., 203
Padate, J .C., 267
Paterson, D., 137
Paxino, G., 345
Peters, J., 387
Pinte, J., 217
Rall, K., 241
Ramaswami, R., 377
Rasmussen, F., 309
Reinhold, R., 407
Renker, H., 401
Rhodes, A., 251
Rohr, G., 371
Rubenstein, C., 585
Said, M.E., 491
Saito, K., 57
Saraga, P., 137
Sata, T., 203
Sato, H., 171
Savage, R., 143
Schuring, A., 41
Shaw, M.C., 459
Sheppard, T., 535
Shin, B.S., 123
Smith, L., 49
Snoeys, R., 223, 387
595596
Somasundaram, S., 267
Soudan, K., 217
Spur, G., 29
Stoferle, T.H., 573
Stute, G., 117,235
Sweeney, G., 421
Takeuchi, Y., 203
Thornley, R.H., 71
Tipnis, V.A., 579
Toenshoff, HK., 241, 371
Tllrner-Smith, A.R., 137
Ueda, M., 467
Van Brussel, H., 217, 377
AUTHOR INDEX
Vanherck, P., 377
Vogt, H.R., 411
Weck, M., 41,185
Welboum, D.B., 155
Westermann, F.E., 565
Wiewelhove, W., 75
Wilks, J., 553
Yamaguchi, K., 527
Yavelak, J., 565
Yokota, M., 527
Yoshimura, M., 209
Zangs, L., 185
Zuffellato, G., 261597
SUBJECT INDEX
Adaptive control systems 117 Machine tool safety 179
Adaptive control, use of common contact Machine tool testing 331
cutting force dictator 109 Machining faults, identification of 401
Aerostatic bearings 267 Machining of nuclear vessel, machine design
Alloys, plastic working of 451 for 261
Alumina tool tips, resistance of 547 Manufacturing data, computerised archives
Aluminium alloy extrusion, limit diagrarns 535 and library systems 63
Automatie factory 17 Manufacturing system 57
Automatie set up of drawings and work plans 75 Manufacturing system, use of computer in 67
Automation of machine tools 13 Metrology, in process or post process 163
Multi station manufacturing systems 17
CAD ofrolls 251
CNC, profile accuracy of difficult to cut NC-CNC 149
materials 129 NC machine tool, automatie control for high
COMPAC program 32 working accuracy 123
Computer control 16 Noise emission of machine tools 371
Computer graphics and NC machine tools 155 Noise levels of metal cutting machine tools 363
Crater wear, an analysis of 585 Numerical control systems, influence of
Cylindrical plunge grinding 387 micro processors 143
Deep drawing of tin plate 507 Performance test for lathes, real ability and
Deep drawing of square drills 527 value of 3 excited vibration tests 337
Die casting, control of manufacture 71 Planetary spark erosion 291
DNC, analysis of a system 44 Pneumatic stepping motors 241
DNC in Japan 21 Program control of turret lathes 229
DNC in the electrical industry 35 Programmable control with bit and word
DNC, real time process simulation 41 processing 235
DNC, structure and function 37
DNC system with robot 24 Quality assurance 49
Drilling machine, television control printed
circuit board 137 Sink forging, mechanies of 439
Dynamic dampers for machine tool structures 217 Slide pressure welding 309
Standard cells for group technology 87
ECM, effects of electrolyte flow rates 275 Structural dynamics of machine tools 209
ECM, of curved long flow path profiles 283 Surface roughness, in process sensor 171
Swarf, powder from 319
Fanuc systems 22 Swarf reclamation 313
Flank wear 573
Free machining wheel, dynamic machining 377 Taper roller bearings, damping 223
Friction welding 299 Thermal behaviour of machine tools,
Grindability of tool steels 395
computation for fmite element method 185
Thermal deformations of machine tools 195
Grinding of parallel surfaces 411 Thermal deformations of machine tools,
Grinding, safety in 421 controlof 203
Group cells, layout design and simulation 99 Toollife data, economic generation 579
Group technology 16 Transfer line, computer control 25
High strain rate, stress-strain data 503
Tungsten carbide tools, deformation of 565
Tuming tools, diamond and diamond
Hole flanging 517
compact 553
Hydrostatic extrusion, semi continuous 491
Incremental forging 467 Vertical surface grinding machines,
Integrated computer production control utilisation with parallel face grinding 407
system 81
Warm forming, lubrication form 483
Lathes, cutting test to assess performance 345 Wire, new method of manufacturing 459
كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net
أتمنى أن تستفيدوا من محتوى الموضوع وأن ينال إعجابكم
رابط من موقع عالم الكتب لتنزيل كتاب Proceedings of the Sixteenth International Machine Tool Design and Research Conference
رابط مباشر لتنزيل كتاب Proceedings of the Sixteenth International Machine Tool Design and Research Conference 
|
|
