قُلْ بِفَضْلِ اللَّهِ وَبِرَحْمَتِهِ فَبِذَٰلِكَ فَلْيَفْرَحُوا هُوَ خَيْرٌ مِمَّا يَجْمَعُونَ
اقدم لكم كتاب
Biaxial-Multiaxial Fatigue and Fracture
CONTENTS
Preface
1. Multiaxial Fatigue of Welded Structures
Assessment of Welded Structures by a Structural Multiaxial Fatigue Approach
K. Dung Van, A. Bignonnet and J. L. Fayard
Evaluation of Fatigue of Fillet Welded Joints in Vehicle Components Under Multiaxial
Service Loads
G. Savaidis, A. Savaidis, R. Schliebner and M. Vormwald
Multiaxial Fatigue Assessment of Welded Structures by Local Approach
F. Labesse-Jied, B. Lebrun, E. Petitpas and J.-L Robert
Micro-Crack Growth Behavior in Weldments of a Nickel-Base Superalloy Under Biaxial
Low-Cycle Fatigue at High Temperature
N. Zsobe and S. Sakurai
2. High Cycle Multiaxial Fatigue
Multiaxial Fatigue Life Estimations for 6082-T6 Cylindrical Specimens Under In-Phase
and Out-of-Phase Biaxial Loadings
L. Susrnel and N. Petrone
Long-Life Multiaxial Fatigue of a Nodular Graphite Cast Iron
G. B. Marquis and P. Karjalainen-Roikonen
The Influence of Static Mean Stresses Applied Normal to the Maximum Shear Planes
in Multiaxial Fatigue
R. P. Kaufman and T. Topper
3. Non-Proportional and Variable-Amplitude Loading
Fatigue Limit of Ductile Metals Under Multiaxial Loading
J. Liu and H. Zenner
Sequenced Axial and Torsional Cumulative Fatigue: Low Amplitude Followed by High
Amplitude Loading
P. Bonacuse and S. Kalluri
Estimation of the Fatigue Life of High Strength Steel Under Variable-Amplitude Tension
with Torsion: Use of the Energy Parameter in the Critical Plane
T. Lagoda, E. Macha, A. Niesiony and F. Morel
viii
Critical Plane-Energy Based Approach for Assessment of Biaxial Fatigue Damage
where the Stress-Time Axes are at Different Frequencies 203
A. Varvani-Farahani
Fatigue Analysis of Multiaxially Loaded Components with the FE-Postprocessor
FEMFAT-MAX 223
C. Gaier and H. Dannbauer
4. Defects, Notches, Crack Growth
The Multiaxial Fatigue Strength of Specimens Containing Small Defects
M. Endo
An Analysis of Elasto-Plastic Strains and Stresses in Notched Bodies Subjected to
Cyclic Non-Proportional Loading Paths
A. Buczynski and G. Glinka
The Background of Fatigue Limit Ratio of Torsional Fatigue to Rotating Bending
Fatigue in Isotropic Materials and Materials with Clear-Banded Structure
T. Fukuda and H. Nisitani
Influence of Defects on Fatigue Life of Aluminium Pressure Diecastings
F. J. Lino, R. J. Neto, A. Oliveira and F. M. F. de Oliveira
Variability in Fatigue Lives: An Effect of the Elastic Anisotropy of Grains?
S. Pommier
Three-Dimensional Crack Growth: Numerical Evaluations and Experimental Tests
C. Call, R. Citarella and M. Perrella
The Environment Effect on Fatigue Crack Growth Rates in 7049 Aluminium Alloy
at Different Load Ratios
M. Fonte, S. Stanzl-Tschegg, B. Holper, E. Tschegg and A. Vasud6van
5. Low Cycle Multiaxial Fatigue
A Multiaxial Fatigue Life Criterion for Non-Symmetrical and Non-Proportional Elasto-
Plastic Deformation
M. Filippini, S. Foletti, I. V. Papadopoulos and C. M. Sonsino
Cyclic Behaviour of a Duplex Stainless Steel Under Multiaxial Loading: Experiments
and Modelling
V. Aubin, P. Quaegebeur and S. Degallaix
A Damage Model for Estimating Low Cycle Fatigue Lives Under Nonproportional
Multiaxial Loading
T. ltoh and T. Miyazaki
Microcrack Propagation Under Non-Proportional Multiaxial Alternating Loading
M. Weick and J. Aktaa
243 6. Applications and Testing Methods
Fatigue Assessment of Mechanical Components Under Complex Multiaxial Loading
J.LT. Santos, M. de Freitas, B. Li and T.P. Trigo
Geometry Variation and Life Estimates of Biaxial Fatigue Specimens
G. Shatil and N. Ersoy
Author Index
Keyword In
Biaxial-Multiaxial Fatigue and Fracture